Weathered Wood Gray Accelerator | Aged Wood Effect, Rustic & Reclaimed Appearance, Interior Furniture, Décor & DIY Projects, Quart

I got this to match a few new pieces of bright orange pine to our existing old fence. Worked much better than I was anticipating. Very easy application. I did one coat. I did not sand or wipe prior to application. I used this on a peg rail & on pine acorn fence post caps (which I did not take a before picture of but they were very bright orange before).

Great stain. Really looks weathered. Terrific for any project

I am having custom cove trim made to use between the backsplash in my kitchen and the countertop. Currently we are deciding what kind of wood to use so I wanted to test some of the wood I have available to me. I used a scrap of lightly bug stained pine we are using for the baseboards. The piece is raw rough wood. I also wanted to use this as learning experience. This wood accelerator is very thin. I used a cheap brush, and this is the result of one coat. The instant the accelerator touched the wood it changed to the color you see and after 30 minutes it still looked the same. Due to the roughness of the wood, it pooled slightly in places and none touched other places. But my takeaway is this works great on new pine, be quick and use a quality brush. I also tried it on a very old plywood pullout shelf. I prepped the wood according to the instructions. I bleached and washed it. Allowed it to dry. After 2 coats there was almost no change in the wood so I am going to stain or paint those. This couldn't be easier to use. Cleanup is a snap, there is no odor to contend with and a little goes a long way. I like it.

This product will certainly turn new pine lumber a light to dark gray, imitating an aged appearance. However, the darker it is, the less it looked aged and the more it looked bruised, with a grayish, purple color. I used this on a pine bookcase that I built to look like it was old, and put together by an inebriated monkey, per my wife's wishes. To age it, I roughed it up a bit with some scratches and gouges, and then used the product. I followed the instructions and used one coat on the entire bookcase. I watched it go from white/yellow, to light gray (which I wanted), to a medium gray. My wife was satisfied, yet I was a bit disappointed. Out of curiosity, I used 2 coats on a scrap piece and the wood turned a very dark purplish gray. If I were to use this again, I may try to thin it with water and test on a scrap piece. One plus, after I applied the product, the next day it was dry and there was no odor. Going on, there was a slight odor, but to me, it was no unpleasant.

When you are working with new pine, and you don't want to paint or stain it, you can either wait 5-10 years for it to look presentable, or you can use this stuff! Best applied with a squirt bottle and foam brush.

I ordered this product just to see what it would do. I needed to make new cedar like old cedar immediately because I'm on a timetable. It works perfect!! Took 30 minutes exactly and I put it out in the sun to help! You can see the brand new piece of cedar versus the other pieces which were bought at the same time!

Is not gray at all. It goes on like water! I do not care for this at all

I bought a dozen cans. Half have very little tint amd the other half have a dark tint.

まさに酢に鉄を入れて作る鉄媒染液のそれと同じような物 鉄媒染液は木材が少し茶色に染まるが、この商品は薄ーく灰色に染まる まるで水なので木材の表面を弾いてしまって塗るのもちょっとコツが要る 自作できる鉄媒染液とほぼ似たような物でこの値段はだいぶ高いと思うので評価は星ひとつ

Product says Coverage per quart is 275 sq ft bu I got s cover area of just 50 sq ft ! Ok I did apply two coats but still 100 is no way near 275:(:(:( I am now short and due to this lockdown cannot even source more qty!

Good

Muy buen producto!

1.塗装前 2.本商品塗装 3.サンディングシーラー塗装 4.水性クリア5分艶塗装 3.4行程を行うと全く別の色に変わりました これはこれで気に入ってます