Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

I purchased this to use on my Mazda Miata which is a very low car and it fit and worked very will. The handle/lever is quite short, but it works well and is easy to use.

This came just in time .. due to a not-at-fault accident, we had to replace several body parts on my granddaughter's Z350. It was already pretty low and she went with custom front and rear clips, as well as side skirts, which made it even lower, clearance-wise. This jack fit right under with still enough lift to provide plenty of clearance to get a drill under to drill required holes to affix the side skirts to the under body. The jack appears to be of good quality and built well; absolutely no slippage. I also have a Corvette that sits low, so this jack will get plenty of usage for oil changes and other minor maintenance going forward .. well worth the money.

I recently purchased the Pro-LifT F-757G 2 Ton Floor Jack to keep in my trunk for emergencies, like a flat tire, and for the occasional DIY car repair. I'm really happy with it so far. I tested it out on my 2011 Sonata Limited, and it lifted the car without any issues. It felt stable and secure, which is really important when you're working under a vehicle. While the lift height isn't as extreme as some higher-end jacks, it's perfectly adequate for most basic tasks. For those rare occasions when I need a little extra clearance, I've found that a simple brick or a block of wood does the trick. Honestly, for the price, I'm more than willing to make that small compromise. This jack is compact enough to store easily in my trunk without taking up too much space, which is a huge plus. It gives me real peace of mind knowing I have a reliable way to lift my car in case of a flat or if I need to do some minor maintenance at home. If you're looking for an affordable and dependable floor jack for occasional use, I highly recommend the Pro-LifT F-757G. It's a great value and does exactly what I need it to do. I did see one review online where someone mentioned needing to buy hydraulic oil to use it. I'm not sure what that was about, as mine was ready to go right out of the box. Perhaps it was an older model or a misunderstanding, but I haven't had any issues with it at all.

Perfect for what I need, seems of good quality. it's on 1" lower than my other jack similar to this but i'll take

This jack is safe and reliable. All you need to do is jack it up once with no load on it and release that pressure. After that, when you unscrew the oil fill plug, it should hiss to let out the trapped air. Jack it up one or two pumps very slowly. The oil should immediately try to rush out of it's at the right level which mine was. If it takes more than two pumps to rush out of the plug the oil level is too low. After you check the level you can screw the plug back on with a flat head screw driver and it's ready for work for the year.

This is the perfect jack to have when you need to change a tire or jack up a vehicle that doesn’t except the jacks maximum lift limit!!

First I would like to say that I wish Amazon would extend the return policy on items like this floor jack. That being said, I drive a Honda CRV and this is not a heavy vehicle. When I first received it I tried to jack up the drivers front tire just to see if it would lift at all. As soon at I made contact to the vehicle, this jack was making some strange noises I've never heard from a floor jack before. It sounded like a wooden pirate ship creaking while at sea and it also made this faint whistling sound. However, that being said it was holding pressure and I just assumed it was a new jack sound. Hinges moving for the first time, first time under load, new paint scraping and breaking in, etc. I then slowly released the pressure and put it back into its shipping box and placed it in the cargo area of my car letting it rest until the first roadside emergency; better than those scissor jacks right? Well, today was the big day! I got a low tire pressure alarm on my dash so I pulled into a parking lot of a shopping center, picked out a nice flat and less populated area in the parking lot and proceeded to change the tire. Once I got my jack under the vehicle and jack stand on standby I proceeded to jack up the vehicle. I was nearly at the max height and the tire still hasn't come off the ground enough. Then that "old ship sound" started again and all of a sudden a loud pop and the vehicle jolted. At first I thought the vehicle was settling on the jack plate. I slowly started to add more pressure but again, slowly. I heard a whine sound and all of a sudden the car dropped 1-2 inches. WHAT THE?!?! Nope, I was done, not risking a car falling on my legs. I ended up changing the tire with the factory scissor jack that came with the vehicle. Once I came home I went to set up a return with Amazon because this jack is unsafe to operate and needs better quality control and testing. I purchased this jack in July 2020 and Amazon said returns are not available after August 1st 2020; really 1 month on a floor jack? This is not something you typically test and use every day, most people buy, put it aside and have it to have it ready to go when needed. Kind of like a fire extinguisher, you don't test them prior to a fire to see if they work. You just expect them to work when you need it. I really don't know what you can use this on, a bicycle maybe. A Cr-v is not a heavy vehicle and that was my experience, I would suggest you look for something safer to use and don't be baited by the low price tag as I was. Thanks and I hope this helps you out.

Low profile yet stable

The low-profile design of this floor jack is a game-changer. It effortlessly slides under even the lowest clearance vehicles, allowing me to lift them with ease. This feature is especially handy when I need to access the undercarriage for oil changes or other repairs. The build quality is impressive. The jack feels robust and durable, assuring me that it can handle the weight and pressure without any issues. It operates smoothly, and I have experienced no problems with its functionality.

Its vey nice and very easy to use.

Buena calidad y bastante bien hecho con buenos materiales solo lo he ocupado con cargas de aproximadamente tonelada y 100 gramos y no hayenido dificultad lo combine con unas torres y se desempeña bien

Excellent Product. Happy. With. Great. Function 😊

Low profile, sleek clean look easy storage