AMZCNC Electric Hydraulic Pump Power Pack Unit 2 Stage Single Acting 110v/120v 10k psi (10000Psi One Way Mini)

If you need a compact hydraulic power pack, this unit is one worth considering. I'm rating it 5 stars, but honestly it's more of a 4.5 in my book. First, it's loud. Second, it doesn't sound like a piece of equipment that is going to provide years of service, but I have seen some of these go the distance, so I'm probably being critical. I picked this because I don't have a use case for a power pack very often. I mainly use this on one of the cheap Chinese hydraulic hose crimpers, and also with a couple of bottle jacks. For my use case, I would honestly prefer a non-electronic control to provide a little better proportional control over the pressure, especially when crimping. However, this has worked well. I just had to get comfortable blipping it on/off as I approached the target crimping pressure of around 4,000 PSI. I liked that this came with oil and was ready to go. I added some fittings, and a quick

When I received the pump the internal valve was not adjudted properly so the pressure would stop at 2000 psi. I adjusted the valve an it is working excelent

Received pump with two hoses that are incompatible with the pump. One of the worst experiences I've had in a long time and zero options for a fix. Now I have an expensive paperweight thanks for nothing

Use it a lot to use my tubing bender. Didn’t come with oil cap but if that’s all then I’m fine

Work perfect 👌🏻

This pump hydraulic pump connections do not match the cylinder. It’s a pain to find matching couplings. It takes hours to match, I believe Amazon should straighten these types of problems out ahead of time!

This is a well built kit for the money, although it wasn’t quite enough pressure for the intended purpose I had for it, it’s still going to be very useful in other scenarios.

Si cumple con las expectativas.

Work good

Las conexiones de las mangueras no se adaptan a la máquina. Qué conexión se necesita. Urge!!!

This product shipped with the incorrect voltage motor. The motor I received is a 220VAC motor not a 110VAC motor as indicated in the product description and on the nameplate. the nameplate also shows the 110VAC specification but the wiring diagram shows a 220VAC source. The reason I know it to be incorrect is that the pump will not exceed 2500psi and is drawing 19A when it starts to stall out at ~2500psi. This was purchased as a spare and now I can't get the motor replaced.

Does not produce the max pressure it says it produces. Motor is not strong

Great option for any single function hydraulic unit in a shop like a press hydraulic pullers or anything with a manual lever pump