J-B Weld SteelStik, 1 Hour Cure, Steel Reinforced Epoxy Putty Stick - 2 Pack, Dark Grey (8267-2)

Amazing product! Fixed the broken arm of outdoor bar stool, and used when needed to attach new hinges (screw placement adjustment) to outdoor bbq storage doors. Saved us hundreds of dollars by easy fix!

Best solution out there for a quick easy fix. Was able to patch a hole in a shipping container and to bond was great. Made it waterproof and helped seal out the elements. Easy to mix. The scent is very strong but what do you expect with such a material. Would highly recommend

A screw fell out of our chair (a chair that had to be assembled by us when we received it, but one of the four screws did not fit right into the threaded hole and over time it loosened and just “fell out”). I looked for the best epoxy that would hold the metal screw, that would not rely on the threaded part. I settled on JB WELD since I’ve used it in the past for other projects, to good success. When received, I put on rubber gloves, kneaded the epoxy putty eonuogh, rolled it to make a rope-like plug, put it into the hole and pushed the screw in. Then rolled a longer rope-like piece with the remaining piece and wrapped it around the screw nut I pushed in (see photo). Let it dry overnight and tested it. It held, no problems. The strength of the epoxy appears and feels like it will last a log time…so I’d say it was successful!!! I am getting JB WELD from now on,for it’s strength,hold, ease of use and reasonable price. 👍👍👍👍👍

I have really come to love this epoxy putty. I’ve ordered it multiple times and it’s nearly always served its purpose pretty well. My only issue is how fast it sets. They’re not kidding when they say that it sets in five minutes and cursing an hour. So you really have to be prepared for exactly how you’re going to use it and you have to use it quickly or else it hardens up and becomes unusable completely. I do wish this had a slightly longer cure time just because there’s not a lot in the tube, so any that cures and is unusable is kind of a big loss. And, if you’re working on a project that is visible and isn’t going to be covered with something, it’s hard to make it look nice in the time you have before it starts to set. But, how many companies can say that their product sets in five minutes and actually mean it? So kudos on being honest and living up to your promises!

Good metal puddy, easy to use. Filled hole in metal gate post, sturdy. Looks good. Hardens quickly.

This stuff it strong, be ready to apply when you mix it because it sets up quick. I used to to repair a damaged clutch pedal assembly in a 1994 ford ranger and it has been holding up just fine. The bushing had disintegrated from the pedal assembly and the clutch pedal pivot wore the hole out in the pedal bracket. From what I could find online there are no new aftermarket or oem pedal assemblies available only used assemblies for around $200 that could potentially have the same issue. I thought about removing the assembly to weld it up but removal required dash removal. That's when I thought of jb weld, I watched project farms test video and decided it might actually work and so far its been working great for 3 months and a few thousand miles. In the picture you can see the hole with a new bushing installed and just how much wear had taken place.

It’s JB weld, it just works, plain and simple. I used this to add a palm swell/custom grip to my cheap scatter gat.

Applied this to a broken fence latch bar. Worked for awhile, then broke off with little pressure when the gate closed. Better as a filler, NOT as a "weld" type product.

Muy buen producto para reparar hierro (en mi caso), destacanto su fácil usabilidad. Una vez que elaborar la mezcla hay que utilizarla rápidamente para que no se endurezca, o seguir mezclando para mantenerlo blando, es el único punto muy a tener en cuenta. Tiene una gran resistencia una vez secado, pudiendo lijar encina si hace falta. Muy revomendable.

Entrega mucho antes, calidad muy buena, lo usé para colocar soportes para extintores de 2, 6 y 10 kilos y funcionó muy bien. Recomiendo lijar ambas partes, antes de colocar el material, dejé secar un día y listo.

Well written instructions that is easy to follow. Easy to apply. After about 6 weeks, I do not detect any evidence of any more leaks. Looks like it has worked well.

Was skeptical about this stuff but WOW it really works. I managed to get a nasty cut in one of my tire stems from having to saw off a stuck metal cap which caused it to start leaking air and made it impossible to fill the tire. Decided to order this stuff on a whim in an attempt to save on a costly repair or replacement and I couldn't be more pleased with the results. I shoved a little piece into the gash and let it cure for a day and my problem is completely fixed! Tire has stopped leaking air and fills normally now and the patch feels totally solid, amazing product for real.

No sirve para lo que dice, no pega en aluminio