GRAUGEAR 20Gbps USB 3.2 Gen 2x2 USB-C Front Panel Type-C Adapter, Motherboard...

Great cable. Not affect by noise and transfer rates with a 10Gbps was spot on. Replaced a flat cable that could not come close to 10Gbps. Why do manufacturers keep making cheap cables for USB c setups. Great quality. Connectors fit tight in mb socket and speed is spot on.

Easy to install, plug and play on a MSI B550M-P motherboard. I don't know if it gets the advertised 20gbps since the port on my motherboard is 5gbps, but I can tell you it saturates at that speed.

If your motherboard has a USB 3.2 Type-E header and you want a front panel USB-C port without buying a whole new case, this is exactly what you need and it works perfectly right out of the box. Installation was straightforward, you just plug the 20-pin connector into the Type-E header on your motherboard, mount the bracket in an empty PCIe slot, and you're done with no drivers or software needed whatsoever. The cable is long enough to route cleanly inside most cases without having to tuck and fold it awkwardly. Build quality feels solid with double shielded wires and metal construction. If you know what this is and you need it, just buy it, it does the job exactly as advertised with nothing to complain about.

Installed the GRAUGEAR G‑AD‑ETC‑10G USB 3.2 Gen 2×2 adapter in a spare PCI slot to add a front USB‑C port to an older build. Setup was straightforward—just connect to the motherboard’s Type‑E header and secure the bracket. If your board supports USB 3.2 Gen 2×2, this is a tidy, high-speed way to get USB‑C on your case. Solid build and easy install—just check compatibility and routing space first.

I can confirm it works but the packaging hints it's rated at USB 3.2 Gen 2 10gbps. It's just too long to properly function at Gen 2x2 at 20gbps speeds. They specifications sheet for USB IF and Intel ATX states that ideally internal cable length should be about 18 inches long, this cable is close to 24 inches long. If you have a really long external cable paired with this plugged into your device it might me hard to get those max stated speeds. The quality is good, I've never seen such a thick and beefy bracket so they did not cheap out there.

Fits perfectly in my ASRock z590c/ac motherboard's USB 3.2 Gen 2x2 header port. Cable good length to reach back of case. Nice snug fit and best of all - it works. Now if only they actually made peripheral devices that took advantage of the full 20gbps speed. 10gpbs is fine though; beats going through a USB hub or wasting a PCIe slot for high speed data access.

If you need another USB 3.2 this is it. Easy to connect to the MB & case. Nice cable lenght. Compatible with my Gigabyte MB. Price is very good for the product quality.

If this is what you need, then go for it. Get that extra port your motherboard wants to give you. Plug in a hub or something. It will work just fine.

I coonect to 10 gb spot and it is working, my current motherboard donot have this 20 gb point, so but it considering the future upgrade, so far good one, worth upgrade.

Wenn das Front Panel nur die halbe USB Leistung bringt, wurde wohl wieder am Kabel gespart. Sogar bei bequiet :( Dieses hier hilft und kann echte 20 Gpbs, leider ist dann der Anschluss hinten am Slotblech.

I had some questions about this item before purchasing. Based on the quick and helpful replies from customer service, I took a chance and bought the item. I'm very impressed by the build quality and the fit within the PC. I use an external SSD on the port connected to it. So far, the connection has been very reliable and the speed exactly what should be expected from a USB-C port like this. I'd definitely buy one of these again.

Excellent quality - if a little pricey. But if it can really handle 20gbps will be worth it. So far I have only been able to test up to 10gbps and it works fine.

Nice quality