SUPCASE Unicorn Beetle Pro Series Case Designed Designed for iPhone X, with Built-in Screen Protector Full-Body Rugged Holster Case for Apple iPhone X/iPhone 10 (2017 Release) (Black)

3-piece case- hard and soft pieces and screen protector as well that all fit on your phone. Cannot tell you how many times I have dropped my phone and the protection is great. The screen protector is hard plastic and does get some scratches. Phone can be seen though so no big deal. Also comes with a belt clip and stand as well. Highly recommend

Great case, very durable and protected my iphone for a few years. BUT I take good care of my phone and take care not to drop it. I have dropped it but from only al few inches above a carpeted floor so can't attest to how much protection it affords.

I have purchased several of these over the years, all the same maker either for the iPad, or iPhone. They are an excellent case for the iPhone! Yes, the case might break in the corners if you drop your phone, but it’s a $20 case vs a $1000 iPhone. Let alone time to get the phone fixed or repaired if you didn’t have a case on it. I’ve dropped my phone from a 6’ height by accident, and the only thing that happens is a cracked corner. Sure, it all depends on how your phone lands, but again the case was broken, not my phone. The design of the case is a bit bulky, and the plastic screen protector kind of sucks to be honest. I find it easier to use an Xacto knife to cut the screen protector off and just use the glass one I have on my phone. One of the nice things about the design of the case is the bezel around the edge. When you lay your phone face down, it keeps the screen a few millimeters above the surface, which keeps it from getting scratched by paper clips, or other objects on the desk at work. It’s also rubber, so it increases the friction of it and it won’t easily slide around on the desk. The outer shell is plastic with some rubber feet that also keeps it from moving around. Overall a great design, and it will survive several drops before needing to be replaced.

Had on s6 s9 and now iphonex will get on next one wish they made phones too probably keep one for more than a month or too Update April 1st 2020 Purchased several of these some are starting to fall apart purchased one for iPhone X on June 24 2018 and on March 1st 2020 the belt clip was destroyed by April 1st 2020 the plastic screen gave out. I immediately ordered another of these for the the iPhone X without checking out any other brand. If your looking for a tough case look no further. We work outside typically in very harsh conditions high altitudes deserts snow wind ice dust sandstorms extreme heat and this case lasted on one of our iPhone X for almost two years the phone itself is flawless. It’s still on another iPhone X we have with almost no damage screen cover is a little scratched and holster broke waiting for screen to pop out and will buy another one of these cases. It’s also still on the s9 but that stays in a office permanently. The s6 has been gone for along time. Bottom line I have thrown the phone several times stood on it by accident dropped it facedown too many times to count it got stuck in a machine one time and the phone in it is still flawless thank you supcase for building a case for the laborers it’s appreciated!

Edit 1: I did some research and found out that the Qi chrager in my car is not compatible with the iPhoneX, so my initial review was not correct in assuming it was a manufacturing defect. That being said, I still rate at 4 stars due to the screen protector, but otherwise think this is a great case. Since I wrote the review, I've had the opportunity to drop my phone from a height of approximately 3.5 feet on a concrete floor, and there was no damage to the phone. Good thing it didn't hit screen first... The case is good. It fits the iPhone X perfectly and is easy to install: you snap on the front and then pull the TPU backing on. Very simple. I've had both Otterbox and Spigen cases, and I'd say this this offers the same level of protection as either of those do. It is a bit bulky if you carry your phone in your pocket, but keep in mind that the iPhone X itself is bulkier than the previous versions. I don't find this any different than previous phones/cases, and have accepted that I'm now going to have some sort of device in my pocket all the time. Where I think some improvements can be made: -This case comes with a screen protector that is incorporated into the front cover. However, it is a little flimsy, and I don't think it can offer the same level protection that a separate screen protector can (such as the Spigen Glas.tR 9H, which I installed on my wife's phone). It does not interfere with any functionality of the iPhone screen though. In the future I may consider modifying this case and adding the Spigen screen protector, but it works for now. Additionally, this case is advertised that it does not interfere with wireless charging. I can't vouch for any aftermarket charging pads, but I have an integrated wireless charger in my truck, and my phone won't charge with this case on. However, for me that is negligible because I often plug my phone in to use Apple carplay, and it charges through that connection. The last reason that I chose this case is because it has port and button covers. Since I carry it in my pocket, my phones have always been prone to collecting dust, lint and other debris in the earphone socket or charging socket. The cover on this keeps the exposed socket protected, but it is held in place by friction and not a locking tab. It works perfectly now, but I cant say that it won't stretch within a 1-2 year timeframe. If you're looking for something that feels like its going to add good protection to your phone at the cost of being slightly bulky, I think this case is an exceptional value, and I'm hoping I never have to test its ruggedness. If that *accidental* time does come, I think this will hold up to the abuse, as long as it doesn't land on the screen.

I love the 2 piece protection it offers and I have had a few over the years. They can break if you are removing the plastic part repeatedly but it still protects it better than most other cases I have tried. My only complaint is the price for these has gone up a lot now.

You know.. it’s been long since I’ve received this item & I thought to myself. Wow, I literally have this brand on 80% of my devices & have for years. Ever since this company started making cases for iPhones I’ve had every new iPhone covered with this brand including IPads & now the Apple Watch; I’ve always recommended it to so many people. Also...... I’ve even handed down my old cases to other people. Some even have the cases or have bought their own of this brand. Get the product....it’s amazing! The only “con” to it is the screen protectors (plastic) comes off over time but holds up well that’s the only thing that would really go first & maybe the only thing. Understand this though, because of the shock resistance & the lip that separates the iPhone face from flat surfaces I’ve never cracked, broken or scratched the glass.

Serious protection. Of course with any case designed for rough use, there are some trade offs that I think are worth the protection. I’ve owned multiple types of cases over the years, from minimal to max protection. I prefer a leather wallet case but just don’t feel they offer enough protection for my needs and they tend to wear out quickly. Some protective cases offer great protection but render the phone unpleasant to use. I was hoping to find what I’ve found in this case. Here’s the pro’s and con’s; Pro’s: - hard rubber rim is thick and projects forward to protect the screen; it’s textured for better grip. - covers all buttons and the lightening port - built in screen protector that does not seem to diminish the sensitivity - hard plastic cover on back - back cover recesses the camera lens to prevent wear when you lay the iPhone on its back - just pry the case apart and pop the phone in. There is a install video link - included holster swivels and the phone clips in securely, giving 360 dog protection Cons: these apply to all highly-protective cases for the most part - the edge of the screen is not as accessible so you will have to bump your thumb for farthest keys on the keyboard. I should not that it does not hinder dragging icons from one screen to another as I have found on other highly-protective cases. - Buttons aren’t going to seem as friendly but you will get used to it. - you will no longer see the beautiful iPhone X case that you paid so much for not enjoy the slim style I wanted a case that would allow me to feel more comfortable using my iPhone X wherever and whenever, especially for photography. The texture and bulk of the case gives the iPhone X the feeling of a camera, without the fear of dropping it and shattering the back glass or screen. I will update this if it doesn’t hold up.