CAP Barbell A-Frame Dumbbell Weight Rack, Red, RK-12BIS-RD

Easy to assembly. Perfect they fit the room space.

this light and small rack surprised me with how well it can handle my dumbbells, reasonable price, and good quality. I stored pairs of 15 kg/12.5/10/8/ and 5 Kg and it stood well.

دليل التركيب في حامل الأثقال واضح جدا و جعل في تركيبه سهل و سريع

impossible to assemble, even with the proper tools

I bought this after buying another type which was not stable. This one is much better and steady

very nice and affordable

Overall this is an excellent stand. The actual holder is small and compact which is perfect for the area I need it in. The holders where the weights rest are rubberized. I have 10, 15 and 25 pound weights on it and is standing steady. Only minor complaint, is that to pull out and put back the weights from the bottom and middle is a little tight. A small bit a finagling is necessary but okay considering I was looking for a compact holder.

I spent WAY too much time looking at different small barbell rack listings on Amazon and elsewhere. Many look shoddily built, too small, too big, no rubber grips to stop scratches - and worst of all, the reviews are so contradictory and confusing. I narrowed my shortlist to 3-4 items, but NOTHING, not the listings, nor the reviews told me what I really wanted to know. In the end I chose the "CAP Barbell Black A Frame Dumbbell Rack" because; - First off this rack is super easy to assemble & very stable (unlike many reviews say). All you need is a spanner, or best a socket wrench (have), and it took me less than 10 minutes, fully done. - I have 3 sets of 10kg, 12.5kg & 15kg Dumbells (~22/27/33 pounds) - so I wanted a 3 to 4x rack (this one is 5x). - It's well balanced, has a wide base, so is rock solid and it's specs say it holds 91kg (200 pounds). I have 75kg on it, so could add 2x 7.5kg and be under spec - and it's easily strong enough to hold a pair of 20kg, so 115kg (over spec) so it's very stable & strong WEIGHT wise. SIZE wise (as in Hex head) is trickier. - Those are kind of medium weights for an average Man, heavy for a Woman. So they're kind of larger hex heads - so the spacing between each "hook" is important. AND THAT is what I couldn't find anywhere. - Many reviews are by Women, and they say it's hard to assemble (it's not) and sometimes for little "chick's" neoprene colourful weights they don't fit and so on...or sometimes reviews are by Guys with HEAVY weights - like 20kg, 25kg, and those suckers have BIG hex heads, so they won't fit so well. - But if you're like me, and you have, say, 5kg, 7.5kg, 10kg, 12.5kg, 15kg & even 20kg large rubber head (just, especially if you only have 3-4 sets, depending on weight/size) hex dumbbells, this is a great rack. - The sizes I mention I have aren't too big - they JUST fit. But above that, you need a much bigger style of rack. This is a budget, cheap, $60AUD rack, and it works great for my small home gym. Probably also totally suitable for the smaller, candy coloured "chick's" weights. - Another problem people mention is not being able to fit your hand in between to lift the dumbbell out. I have smallish hands for a Man, and I can (just) do it for 10kg, but heavier, no - BUT that's not how you should lift heavy dumbbells out anyway - my 5th photo shows how you're meant to do it with two hands. --> FINALLY here is what I COULDN'T find ANYWHERE (for any racks!). My 6th photo shows what I suspected...the "gap" between each "hook" gets smaller as you go up. So my 3x dumbbell sets fit fine on top of each other at the BOTTOM. But at the top/they don't fit! As you can see I spaced them out anyway. My pic 6 shows with a tape measure, and they lose 2cm per "hook" as you go up. Hope this helps save some people time. But unless you have really heavy weights, I recommend this as really good home gym dumbbell rack.

Item came well packed, with an instruction sheet. The instructions are nowhere near lego quality, but if you have assembled stuff before, it is not rocket size. Took me about 20 mins to carefully self assemble it. If you have 2 persons, can be done in 10 mins. Need a wrench (not included) and Allen key (included). All in, very stable shelf with tiny footprint. If your hands are large, you may find it a bit difficult to take the dumbbells out due to the width of the holder, but overall I am happy with the purchase. I am fitting this rack with a pair of 8 , 10 , 12, 15 and 20 lbs. If you have significantly heavy set of weights from 16 to 40 lbs, this rack will not fit, as the dumbbells will be too big for the vertical space it provides. Hence, i would say, if you have 5 pairs, starting with 6 - 8 lbs and ending with 25 lbs, it should fit fine! After using this for 2 weeks, I realised that you CAN actually fit 20 to 40 lbs dumbbells, if you like. However, you will probably be able to fit just 3 pairs (not 5 pairs), leaving the alternate 'row' free.

外国の方のレビューで、幅が小さくは見えるが取り出しやすい幅が確保されているとのレビューがあり、ヘックスダンベルにはコンパクトで丁度良いかなと思って購入したが、真ん中下の二つの柱をつなぐ細い支柱のネジ穴の左右のずれがひどく、高重量を扱うにしては組み立てが怖かったので返品した。また、手の入る隙間であるが、やや手が小さい自分の手をもってしても、かなり幅が狭い印象なので、ここから取り出して直ぐ筋トレするというよりは、一旦別の場所にダンベルを慎重に取り出してトレーニングする必要がある。金属製品のネジ穴のずれは海外製品に良く見られる難点であり、このあたりは個体差もあるかもしれないが日本製をお勧めする。

For the price it’s unbeatable. As stated by others this rack is mostly for smaller weights but I managed to make it work with pairs of 15kg, 12,5kg, 10kg and 7,5kg. The bigger weights are a little difficult to get in and out but it still works.