Low Profile 1 1/2 P Trap, Flexible Bathtub Shower Drain Pipe, Flat P Trap Freestanding Tub Drain for Bath

It does not cut tiles, company in responsive to refunds, had two delivered and no reps once when requested to return the unopened one, let alone the one that just did not do its job

Great for plumbing with very little space. Works great!

Tuyau à décoller

Product was flimsy, with very thin plastic, and seals were of very poor quality. I decided it was not fit for purpose, will look elsewhere for an acceptable alternative.

I bought it to replace a 3' long drain tube contraption that came with a freestanding Home Depot tube, installed over a year ago. This one works much better than the OEM setup and is of much higher quality. The OEM kit drained from the side of the tub drain, and the tube was easy to kink. This new one drains from the bottom of the tube drain which aids flow. It will depend on the design of your tub. The installation was done with the bathtub in location, sitting up on four 6" furniture blocks. It worked, and I could see how to best route the drain tubing. Note: if you are connecting the drain hose to a 1 1/4-threaded male ABS or PVC fitting going to the P Trap. You will need the bushing listed below to adapt up to 1 1/2". I used pipe dope thread sealant instead of Teflon tape for a zero-failure assembly. Also, tightening onto the 1 1/2" bushing takes using a pair of Channel Lock pliers with V jaws to grip the OD of the plastic nut. It takes a bit due to the pipe thread on the busing, and be careful not to overtighten it. Or, use two washers to lessen stress on the nut. Tighten until the hose snugs up and seals. Get it on Amazon as: 1-1/2" Male NPT to 1-1/4" Female NPT Reducer Bushing Pipe Fitting, Plastic Reducing Pipe Adapter Fitting, Reducer Bushing Pipe Hose Fitting (1) Brand: COLDDD Channellock 442 Tongue and Groove Pliers, 12 In, Black, Blue, Silver Visit the Channellock Store