PLA 3D Printer Filament, Black & White, 2-Pack, 2KG Total

Got for Bambu A1 mini. Great price and kid uses roll after roll of filament. No issues with printing, were packaged great and kid has already gone through all of it. Prints looks great and the quality is on par. I guess I will be ordering more!

This film worked so good. It lasted long. It didn’t clog my printer and was very pretty once it was finished. It was a great deal as well.

This is exactly what you want from budget PLA - it does its job without making your life difficult. Been running this through my Ender 3 and honestly, as long as you stick to the recommended temps (I found sweet spot around 200°C with 60°C bed), it prints like butter. No stringing issues, no random clogs, just clean prints time after time. The black is properly black - not that weird semi-transparent dark gray you sometimes get with cheaper filaments. Layer adhesion is solid; I've dropped a few prints and they don't shatter like glass like some other budget PLAs. You might get occasional popping from moisture if you store it poorly, but that's on you, not the filament. Only reason it's not getting 5 stars is because it's not quite as forgiving as premium brands if your settings are off. Bridging is good-not-great, and you might need to dial back speed on overhangs. But let's be real - at this price point, for basic functional prints or prototypes, it's hard to complain. It's become my go-to for when I need to print a bunch of parts and don't want to burn through my expensive stuff.​​​​​​​​​​​​​​​​

The amount of filament that comes on these two rolls is absolutely amazing. I previously purchased some other filament that are primary colors and there is not near as much on those rolls and I believe I paid more for those rolls than these two rolls combine. So black-and-white are definitely colors. You use a lot in 3-D printing. This is a great deal and the filament is top quality.

I wish I could do half stars, I'd give 4.5. I just started printing (not quite a month yet) and I've ordered 2- 2 packs and 1- 4 pack and I've gone through 3 of the rolls already with rolls 5 and 6 in the printer this week. The first 5 spools have been fine. I had one small issue with the black in the first bundle, but it was resolved quickly, and no more issues. In this last pack, the black has been tangled on every single print after I got about 200g in. I basically have to babysit the printer when I'm using this roll so it doesn't ruin my prints. I didn't want to go down a full star yet since this is the first roll to give this much trouble, but I can't give it a full 5 with the way this spool was wound. Other than this one spool, the filament has been reliable at a good value for regular-use items. I've tried most of the popular brands and so far none of them have tangled, but most of them also don't offer this same value.

This filament does not stick well with the A1 mini. Big disappointment. Edit... change the speed settings. It works fine.

The Pros: Seamless Compatibility: These work perfectly with the Bambu Labs P1S. I have had zero issues with the AMS loading or unloading process, which makes for a very smooth printing experience. Print Quality: The results are consistently good. Every print has come out looking solid and professional without any fuss. Great Value: The price point is excellent for the level of quality you get. It is a very reliable budget-friendly option for regular printing. The Cons: Bundle Limitations: I wish there were better bundle options available. While the product itself is great, more variety in the multi-pack deals would be a nice addition. Bottom Line: This is a solid choice for anyone looking for reliable filament that plays well with high-speed printers and AMS systems. It offers great quality at a fair price and has become a dependable staple for my setup.

I had high hopes for this, since it has the Creality brand label on it, and the price was attractive. And I've had pretty decent results with Creality parts for my Creality Ender 3 printer in the past. But in short, this turned out to be a terrible filament. To be fair, I didn't try both the black and white spools. I started with the black, and after it'd clogged a hotend and shredded so badly inside the extruder (a retrofit Sprite direct drive) that I had to tear the whole thing down to clean it all out; I wasn't in the mood to do it all again with the other color. So black is getting returned with 975g still on the 1Kg spool (I have a spool holder with a scale built in) and white is going back unopened. The photo here shows what the worst of the jams into the hotend looked like when I got it apart. The photo also shows two aborted temperature towers and the problems with overhang. Other people have complained about stringing in the reviews for the filament. To be fair, I didn't see stringing at what I think to be the best extrusion temperature (210C). But at that temperature, the tower didn't lie, and the warpage on the overhang is clearly visible in the photo. The reason that the two temperature tower prints are aborted is that I long ago upgraded my printer to run Klipper with Mainsail (and Crowsnest) on a Linux host board, and when I did, I added a filament runout detector that has both a switch and an optical encoder that pulses for every 2.88mm of feed. I leave a little slack and let 3.5mm go by without a pulse before a "park the head and wait" macro responds to the encoder wheel not turning. With this filament, as soon as things started to jam, the printer itself was smart enough to stop before a real problem ensued. Thinking that the filament didn't have enough friction with the drive wheel, I told the software to ignore the runout encoder. And that's when the whole thing jammed up in much the way as I've read about in other people's negative reviews. I can't say definitively what causes the jamming, but because of the poor overhang and my need to be very careful in choosing a print temperature, my instincts say it's more a materials purity problem than an evenness-of-filament diameter problem. I didn't more than 25g into a 1kg spool before deciding I'd had enough, so I can't say for sure that it's wound well all the way down the spool. But from what I've seen, it doesn't appear to have tangles and the overall winding is pretty clean. It's just that the plastic itself is garbage. And that's kind of a hard problem to get around, no matter how carefully you tune things. I didn't even get as far as calibrating flow, since I'd already decided that the filament was junk and that it was going back. On the bright side, I was planning on replacing the drive gear on my extruder, since it's seen a lot of mileage over the last few years. So I had a ready-made excuse (clearing a horrible filament jam) to do it. I just wasn't planning on doing it today.

Excelente filamento, funcionando sin problemas ni atasco,buen acabado , recomendable

otimo custo beneficio exelente impressao pena naomanter o preco e estoqeu para poder comprar mais

I thought I read that those were 2spools of 2kg. They are 2spools of 1kg. They are not as cost effective as jayo filament most likely due to me being canadian.

Excellent quality and prints well. Good price too

Excelente filamento.