Veepeak OBDCheck BLE+ Bluetooth OBD II Scanner for iOS & Android, Car Check Engine Code Reader Wireless OBD Diagnostic Scan Tool

Easy to use, just plug it in. Worked for my 2025 Jeep Gladiator and 2020 BMW M2. On the Gladiator I reset the halogen lights to LED and on the BMW I was able to "register" my new battery. Saved me alot of money from paying dealer. Works with JScan (iPhone) on the Jeep and with BimmerLink on the BMW. Recommended.

Easy to use and great product! Job done and saved tons of money!

Worked well with the Ford F53 chassis and the V8 Godzilla engine. Plugged in, identified the code, and cleared it in less than 15 minutes.

Worked great without issue. Manual was able to tell me which adapter to select in a third party app. The scanner was able to clear multiple warning codes and change car settings normally only available at the dealer. No negatives that I know of so far. Left it in overnight without any issue to battery drain. Long term reliability is still to be seen, though.

The product worked well. Be aware that you must use your own OBD II app on your phone. I used Car Scanner ELM OBD2 on Google Play Store, which worked great and was free because I play pass subscription. My only complaint is the device feels cheap. The casing is thin, and I can easily see this getting broken when removing or putting too much force on it.

I used this unit on a 2019 4Runner, paired with CaristaOBD app (subscription based - on their app, this Veepeak unit is listed as "Kiwi3"). After plugging it in, the blue LED illuminated, signifying it has power. Using the app made connection, setup, & use a *breeze (it connected as fast, if not faster than my phone does to the car stereo). I was EASILY able to address all the items I sought the pair for. The best thing about this Veepeak, is that I don't have to 'marry' any single app, in fact, there's plenty of free & even better - 1-time-purchase apps that fully utilize the Veepeaks specs. It handles everything from the customization options that Carista offers, to the more DIY mechanic oriented stats of something like AlfaOBD (older vehicles) or OBD Fusion (more modern). The Veepeak is very small, comes with a rugged box, & can be swapped to multiple vehicles in seconds. This unit punches well above its pricetag.

Bought to read oil temperatures while driving, then i was going to return it, turns out it was a user error and i was using an APP that didn't read oil temperatures, anyways after getting a different app, this thing is amazing, i drove over a train track and my CEL came on whilst driving, i scanned it immediately and it was just an exhaust leak cleared it and been running good ever since, been connected on my car since i had it and it is great. affordable and the connection is stable as long as you have the app open.

So I used this device to re-code the ECU/ECM on my 2013 Mini Cooper (R56). For that purpose it worked great. I was able to edit the ECU and unlock a number of features. For example, in the stock configuration double clicking and then holding the unlock button on the remote will wind the windows down from the key fob. However there’s no way to roll the windows back up from the fob. I was able to change the roll down function to pressing and holding unlock just once, and enabled the window roll up feature by pressing and holding the lock button on the fob. I was also able to disable the seatbelt chime for the passenger front seat since that’s where my dog sits and it was incredibly annoying to have that going off the whole time she was up front. Next, I was able to enable some cool lighting features. For example, I enabled a module in BimmerCode that keeps my fog lights on while the high beams are on or while they’re flashed. I was also able to turn off hot and cold bulb warnings for a couple of lights (I have a modded rear bumber with fog lights from the JCW so I needed this to prevent errors from showing). Finally, I made a few changes for quality of life. I turned off the seatbelt chime for the driver seat since I always wear it and the constant reminder was just a little annoying. I enabled the option to automatically fold in the mirrors when locking the car, enabled the mirror to tilt downwards when putting the car in to reverse, adjusted the digital speedometer to show an accurate measurement instead of the slightly modified number BMW shows with the factory settings, and a few other relatively simple changes like that. I never had any issues with connectivity or any other problems with the Veepeak device. It worked flawlessly through all of this re-coding. From what I understand this device will also work with apps like “Torque” where you can connect to a tablet and show gauges like coolant temp, oil pressure, etc., right through the tablet. I believe you can also read codes through it as well with the right app as BimmerCode is able to clear any codes with every re-code. So there’s a wide range of what’s available to you with this device as long as you get the right apps. From what I’ve seen in my personal experience, there’s no reason to buy the more expensive options when the majority of your costs are going to come from the app purchases you’ll need to make anyway. Also, some people have complained that the Bluetooth devices or Bluetooth low energy devices like this have a problem with data transfer speed. I personally didn’t see a problem there. Re-coding was quite fast and I doubt the WiFi versions are any faster as I believe the bandwidth bottleneck is with the ECU/ECM and not with the transfer protocol itself (Bluetooth/BLE/WiFi).

Does exactly what I wanted.

J’ai acheté ce petit boîtier OBD pour mieux comprendre les voyants qui s’allument sur la voiture de ma compagne et la mienne ( Ford.Focus et Peugeot 207 ), et je suis vraiment impressionné par sa simplicité d’utilisation. Il se branche en quelques secondes sur la prise OBD et se connecte en Bluetooth sans aucun problème, aussi bien avec mon smartphone Android que sur la tablette iOS de ma compagne. ✅ Points positifs : Connexion rapide et stable, pas de déconnexion intempestive. Compatible avec plusieurs applications de diagnostic (Torque, Car Scanner, etc.). (Certaines applis peuvent être payantes.) Permet de lire et d’effacer facilement les codes défauts. Donne accès à plein d’infos en temps réel : température moteur, consommation, vitesse, etc. Compact, il tient dans la boîte à gants sans souci. 👉 En résumé, c’est un accessoire indispensable pour surveiller l’état de sa voiture et éviter les mauvaises surprises chez le garagiste. Pour le prix, c’est vraiment top. Je recommande à 100 % !

Prodotto ben fatto, stabile nella connessione e facile da usare con le app OBD. Per i PID standard funziona senza problemi ed è comodo per controlli veloci sulla macchina.

Works great

This OBDCheck works perfectly over Bluetooth and has been extremely helpful in identifying faults with my car. The setup is quick and straightforward, and the connection is stable and responsive. It provides clear, accurate readings that make diagnosing issues much easier and saves trips to the garage. A high-quality, practical tool for any car owner who wants to monitor and troubleshoot their vehicle efficiently.