Polyurethane Windshield Adhesive — Fast Curing Auto Glass Glue with High Bond Strength, Black Windshield Sealant for Vehicle & RV Window Seal, Urethane Adhesive with Gloves, OEM Quality, 10.5 fl oz

Used to reattach the sliding rear window track on an F150. It worked great. It was easy to use and the only thing I would have done differently would he to put the bead of adhesive on the truck and not the track. That's because it could easily get on the upholstery if your not extra careful maneuvering the track back onto the truck. Don't forget to scrap off the old primer and clean the back window and area real good. Then use a good primer- I used Calvana Windshield Primer.

Worked great

Worked great. Two suggestions for success: If you can, put the tube in an oven at 100 degrees. My toaster oven ferment setting was perfect. Left it in for an hour while I got the glass and door prepped. The caulk flowed easily from my hand caulk gun. Second, cut the V in the tip after cutting your angle. It lays down a perfect bead. After that I placed my excavator door glass in place and held it with blue tape. It was 50 degrees outside, so it firmed up and held the glass easily.

I purchased this polyurethane windshield adhesive for a DIY windshield replacement, and it works well. The bond strength is impressive — once cured, the windshield feels secure and stable, giving me confidence it will hold up over time. The fast-curing formula is convenient, but you have to work quickly and carefully. The adhesive sets faster than I expected, so applying it evenly and positioning the windshield correctly requires focus. The nozzle helps with precision, but a steady hand is important to avoid excess adhesive seeping out. Overall, this is a reliable, high-strength adhesive. It’s great for windshield installations as long as you’re patient and precise during application. I’d recommend it for DIYers and professionals alike.

Worked great

GOOD STUFF thanks

Excelente producto está de muy buena calidad

Good product

Bonne produit facile à utiliser ça fonctionne avec un pistolet ordinaire pour silicone, il faut seulement retirer fermeture en arrière et l’intérieur il y a na un plastique pour pouce

Well recommend

Great project very strong stuff

Good old polyurethane. Everything (for the most part) sticks together. I found out that it electrically insulates wires too. Be careful.

Best product for attaching mouldings to your vehicle.