---
product_id: 53992248
title: "GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display)"
brand: "gstop"
price: "$65"
currency: MXN
in_stock: true
reviews_count: 12
url: https://www.desertcart.mx/products/53992248-gstop-g-force-brake-light-flasher-accelerometer-ebld-brake-force
store_origin: MX
region: Mexico
---

# 0.6G/0.8G Trigger Compact Size 2Hz/3Hz Pulse GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display)

**Brand:** gstop
**Price:** $65
**Availability:** ✅ In Stock

## Summary

> 🚗 Light Up Your Safety Game!

## Quick Answers

- **What is this?** GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display) by gstop
- **How much does it cost?** $65 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.mx](https://www.desertcart.mx/products/53992248-gstop-g-force-brake-light-flasher-accelerometer-ebld-brake-force)

## Best For

- gstop enthusiasts

## Why This Product

- Trusted gstop brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **🚀 Instant Response:** G-Force triggers ensure immediate brake light activation.
- • **📦 Lightweight Design:** Weighing only 40.8g, it’s easy to install without bulk.
- • **🚦 Safety Meets Style:** Elevate your vehicle's safety with a sleek design.
- • **🔋 Low Voltage Operation:** Efficiently operates on just 12 volts.
- • **🔒 Undetectable When Stationary:** Stay stylish and safe without drawing attention.

## Overview

The GSTOP ® G-Force Brake Light Flasher is an innovative Emergency Brake Light Display (EBLD) system designed to enhance vehicle safety and style. With G-Force triggers set at 0.6G and 0.8G, it activates your brake lights instantly, ensuring maximum visibility. Its compact design (4.6 x 2.69 x 0.99 cm) and lightweight build (40.82 g) make it easy to install, while operating efficiently on a 12-volt system. Stay safe and stylish on the road!

## Description

GSTOP is a vehicle brake light device that is activated when heavy braking is applied, to warn the vehicles behind of an impending urgent need to stop, helping to preventing rear end collisions. GSTOP is inactive when stationary and only triggers under moderately heavy braking (depending on installation). GSTOP does not flash constantly / continuously like all other illegal for road use brake light flasher. GSTOP is a smart microprocessor based device that utilises a Bosch high speed digital accelerometer to monitor deceleration. GSTOP factory pre-set configuration: 2x G-Force Triggers preset at 0.6G and 0.8G G-Trigger Timers preset at 2.0 and 3.0 seconds Pulse Frequency preset at 2Hz / 3Hz

## Features

- Emergency Brake Light Display (EBLD) System
- Undetectable when stationary
- Adds style and safety to your vehicle
- G-Force Triggers preset at 0.6G and 0.8G
- Pulse Frequency preset at 2Hz / 3Hz

## Technical Specifications

| Specification | Value |
|---------------|-------|
| Brand | Gstop |
| Product Dimensions | 4.6 x 2.69 x 0.99 cm; 40.82 g |
| Item model number | GSTOP ® LITE v1.01 |
| Manufacturer part number | LITE v1.01 |
| Position | Rear |
| Voltage | 12 Volts |
| Item Weight | 40.8 g |

## Images

![GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display) - Image 1](https://m.media-amazon.com/images/I/91NzER2S2EL.jpg)
![GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display) - Image 2](https://m.media-amazon.com/images/I/81zL0NdEE1L.jpg)
![GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display) - Image 3](https://m.media-amazon.com/images/I/81KC-N0HevL.jpg)
![GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display) - Image 4](https://m.media-amazon.com/images/I/51ZdIrwRtYL.jpg)
![GSTOP ® G-Force Brake Light Flasher - Accelerometer EBLD Brake Force Warning System (Emergency Brake Light Display) - Image 5](https://m.media-amazon.com/images/I/91EWhbVWCQL.jpg)

## Questions & Answers

**Q: Will this trigger the brake light during engine braking on a motorcycle?**
A: GSTOP module only powers up when the brake light is powered up by the drivers foot or riders foot/hand.. so this model does not support an 'engine braking' alert, sorry.  We are looking into making a BIKE version in the future.

**Q: Thanks, I can't test it on the bike now. Is another test possible besides the internal one? Say moving your arm fast from the left to the right.**
A: Because the firmware has error correction enabled so that road vibrations, bumps and knocks etc do not cause nuisance activation, it's not possible to activate GStop with fast movements.  You can however tilt the forwards arrow towards the gravity (the ground) which will exert more than the trigger limit required for a sustained period of time to activate the flashing.  GStop also ships with a bench test loom, so you can connect a 9v battery to it and place it in a temporary location such as passenger seat in a car in order to test and adjust before permanent installation.  The test look includes a signal light to display when the flash is active. :-) Hope this helps.

**Q: Can this be wired in to work with existing brake light?**
A: Yes thats how you wire it straight in the brake light circuit . only two wires.dead easy

**Q: Does this product work with a combined brake and running light?**
A: Providing the unit in question is not a modulated single filament lamp (single circuit), if the unit has a separate circuit to the side light and another for the brake light, then yes, the device will be suitable, you will install to the brake light feed wire only.  For modulated lamps where by there is only 1 feed wire that provides a dim and a bright switched signal via a light control module in the vehicle, we cannot advise this would be suitable.

## Customer Reviews

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Excellent bit of kit
  

*by K***I on Reviewed in the United Kingdom on 4 January 2018*

Excellent bit of kit!Test harness was great, I was able to test how it works, I stuck to the dash to see how much force is required to activate the system.Install was very easy, the module itself it very small, the supplied connectors made it a doddle and have grease inside so should to some extent stop water getting in and corroding the connections.Simply cut the positive line and use the 2 supplied connectors to attach the red wires. Splice into the ground and attach or cut the ground and use the supplied connector.Once fitted you could always adjust the angle it sits at to change how much braking force is required to activate.Overall for a £8 product it is a great bit of kit.

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Such a simple peice of kit with such a big benefit.
  

*by C***S on Reviewed in the United Kingdom on 2 January 2018*

The media could not be loaded.
                
            
                
            
        
    
    








  
  
    A simple and cost effective way make yourself more visible day and night.This was easy to fit though I had to solder my connections as the wires on my MT10 were too thick for the included terminals.Under normal braking your brake light functions normally but under more harsher braking it flashes until you release the brake lever. I'd like to see the light continue to flash after brake release under some internal relayed timer for a few seconds to keep those behind alerted once you come to a stop. This is only a preference and by no means a grip on what is an excellent bit of kit.If you do one thing to help keep you seen and safe fit this.It's less than a tenner so why wouldn't you?

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Should be safer to ride my bike now - I really like it
  

*by F***. on Reviewed in the United Kingdom on 17 March 2017*

All you need to get it working is included and the installation is very easy. I just used other connectors and I had to make a flat horizontal surface to mount it. It's hard to find one on my NC750S.Because it was really cold the last weeks here in Germany I only did a short ride to test it. I did a minor breaking and it worked as discribed.I attached another single led to the handlebar so that I was able see it working. The wires still can be seen in the picI would buy it again

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.mx/products/53992248-gstop-g-force-brake-light-flasher-accelerometer-ebld-brake-force](https://www.desertcart.mx/products/53992248-gstop-g-force-brake-light-flasher-accelerometer-ebld-brake-force)

---

*Product available on Desertcart Mexico*
*Store origin: MX*
*Last updated: 2026-02-21*