MaxWorks Washing Machine Base Stand with 4 Locking Wheels & 8 Strong Feet, Adjustable Flat Dolly Cart Mobile Base for Washer, Dryer, Refrigerator, Furniture and Appliance - 660 lbs Capacity

This dolly is definitely a value for the money. The locks on the wheels are very easy to use and it's easy to put together. The parts seem to be good quality material. When I put it on the floor after putting the wheels on it had good stability and there are even level guides on all four sides. If I were using it for anything other than a portable washer and dryer, it has that lift capability. It's definitely functional on all levels. I didn't put on the leveling feet yet but they are easy to put if I need to. I recommend reading the entire instruction manual before putting it together. I can thoroughly recommend this dolly.

Love this dolly. I was looking for something to put under my outdoor propane fire table so I could move it around the patio by myself. This was perfect. I love the flexibility with the sizing, and it was easy to put together. Rolls well, and locks easily. I used it all summer, will see how it holds up in the New England winter.

Holding my dish washer perfectly over the last two or three months. Assembly was fine. The dolly has built-in measurements for width. I would recommend a powered screw driver. The wheels are fine, but do tend to slide (not rotate & roll) on faux hardwood floors. The leveling feet are acceptable.

bought a used one. It was in almost new condition. It holds up a mini fridge just fine. I bought this originally to move a full size dryer. Didnt try it not moving for a couple months but Im mot sure how that will work up a ramp with those feet. Bought another for two drawer file cabinet. its sticks out on both sides about 2 inch. Fits front/back fine. The quality is just ok. The pads on corners wont last they are very cheap and thin. the aluminum bars feel to thin to hold up something heavy alone. Definitely need to engage those feet. but Im assuming thats how its supposed to go, 1loosen feet 2 move 3 lower feet to level and hold up what your using it for.

Easy enough to figure out how to assemble this item. It's pretty light weight so I'm highly suspect of the product stating it can support a "400 lbs" item as the aluminum arms/posts are pretty thin. But I put it under a rather cheap dryer that isn't anywhere near 400lbs. I had to make some adjustments because the built in foot posts on the bottom of the dryer. So far it's doing the job I need to move this dryer around. I bought a used like new product and it looked great. I wouldn't have thought it was a new/used as everything was packaged and sealed up. So for the price I would recommend this item for making moving appliances so much easier.

Great caddy, well made but there’s a funny side too. The description says it’s 17x17 but it’s actually 18 x18 at the smallest adjustment. The tape measure they sent with the cart is so far out of calibration it reads 14 x 14. I wanted one 16 x16 and expected to have to cut the SS bars down. This was necessary since to maintain the strength, the weight should be placed directly over the wheels. The adjustment bars actually are stainless steel and I couldn’t cut them with a hacksaw. I had to use a grinder with an abrasive cut off wheel. I don’t expect most customers would be prepared for that. Our small apartment size washer is now sitting on it. It rolls in and out of the closet with ease and easily supports the washer. The screw down legs hold it steady and in place when I use. I don’t know why I didn’t think of this sooner. Been dragging the washer out of the closet for four years without wheels.

As others have mentioned this might not be quite small enough for your use case. Mine is a 0.9 cf Comfee portable washing machine, which has about a 1.5-inch smaller footprint than this thing will optimally support since you should be trying to get the feet of your appliance over the wheels of the dollay, so I cut about 1.25 inches off of each metal rod with a hacksaw. (I started with a Dremel metal cutting wheel but it seemed like I was going to need one disposable wheel for each rod, so I switched to the hacksaw with a metal cutting blade.) I opted for this dolly, expecting to do a modification, instead of one of the more popular ones from a different brand that might have already been the right size, because that one had too many reports of bending and other issues. No regrets with this one so far, but I have only had it for about two days. It supports my 44 pound washing machine just fine so far and the wheels roll nicely on a hard floor. Will update this review if needed. All of the wheels lock properly and the four supporting feet screw and unscrew smoothly enough despite being plastic. I noted no movement of my machine on this dolly with all of the wheels locked while the machine is in operation. Be sure to balance your loads properly to avoid excessive vibration, of course, and keep an eye on things. It might or might not make your machine more noisy, but it seems as though using the four supporting feet could improve this, but I am not done testing yet. Others have mentioned upgrading to better vibration pads, and I might do this as well.

it works but build quality is pretty poor. very cheap plastic and aluminum braces. a fair price is probably half MSRP. also missing screws. i used it to lift a small chest freezer so it can roll under a tall work bench in my garage

El accesorio es de buena calidad, solo que en este caso una de las 4 esquinas vino repetida, por lo que la reja de colgar ropa no ajustó según el diseño. Tuve que usar pegamento. Por lo demás muy bien

Very sturdy. Like the extra legs for additional support

We needed a mobile base for our portable washing machine. This adjustable base works perfect! Levelling and locking options are super handy for this application.

Had these installed and with the ratchet strap it’s squeezing the dryer quite well to the washer. Something of concern for folk buying is ratchet straps can loosen over time, so you will need to constantly monitor things In my case I bought this kit because the official kit was not being sold anymore. As extra security I plan on making my own metal bracket to mimic the oems

Good