Question 1

Are there holes pre-drilled for bolting to the floor?

Accepted Answer

No pre-drilled holes in the safe.  My safe came with 2 - 4" lug screws, 2 washers, and 2 masonry anchors.  To anchor safe to the floor, one has to tip the safe on its side and drill holes through the bottom at two indentations on opposite sides of the safe, using a 7/16" , masonry bit.  Then sit the safe upright and place it where you want to secure it to the floor, mark the floor (through the drilled holes), move the safe aside, drill into the floor using 9/32" bit for wood floor or a 3/4" masonry bit for masonry floor (then install the masonry anchor in each hole); in either case, drill holes 2 1/2" deep into the floor.  Move the safe back over the holes; for wood floors, insert the screw through the washer, through the holes in the safe, and into the holes in the wood floor - tighten with a wrench.  Do the same for masonry floors and tighten with a wrench.  Hope this helps.

Question 2

(1) Can you change the combination?  (2) Do you need both the key and the combination at once to open, or is the key an "override" ? Thanks.

Accepted Answer

I'm not sure why people are saying you can't change the combination, but the user manual provides instructions on how to add your own "user code" and even temporary "user pins".  The factory code can't be deleted but if you just set up your own user code you can change that anytime you want. In case this is Amazon being weird and linking these answers to a different product, my answer is for the electronic combination lock product (SFW123FUL); per the same instructions, the physical combination lock version does not allow for changing the combination.http://www.sentrysafe.com/pdfs/OwnersManuals/513023.pdf

Question 3

can this be bolted to the wall thru the back or to the floor?

Accepted Answer

There are two designated spots for you to drill through that is located on the very bottom shelf inside the safe. You drill through those two spots and use the included mounting hardware and this safe isn't going anywhere. There are no designated spots to drill through the back/side so it is not wall mountable. I would understand why because most homes have drywall so the drywall could be demoed around the safe and then the safe can be taken. Ripping up the floor (carpet, wood, sub flooring, concrete, etc.) will take a lot more effort when this safe is properly mounted to the floor from within the safe.

Question 4

is the handle plastic? i had a previous sentry safe and the handle was plastic and felt like it would break

Accepted Answer

Yes, the outside of the handle is plastic, but I believe the actual handle mechanism is metal. When you're opening it, the motion feels solid so at least the innards is metal. If someone tries to turn the handle without knowing the combination, there's a feature that is meant to allow the handle to still turn without engaging the bolts. This is a security feature.

ASIN	B0BQ8LPBV7
Alarm	Audible
Best Sellers Rank	174,750 in DIY & Tools ( See Top 100 in DIY & Tools ) 304 in Hotel Safes
Brand	SentrySafe
Capacity	0.82 cubic feet
Chamber Depth	9 Inches
Chamber Height	13.7 Inches
Chamber Width	8 Inches
Colour	Black
Control Type	Knob Control
Customer Reviews	4.4 4.4 out of 5 stars (216)
Included Components	Fire/Water Combination Safe
Item Dimensions D x W x H	47.8D x 41.7W x 34.8H centimetres
Item Type Name	Safe
Item Weight	24.95 kg
Lock Type	Combination, Electronic, Key
Manufacturer	SentrySafe
Material	Durable Resin Wrapped Concrete
Model Number	FPW082KSB
Mounting Type	Tabletop
Number of Items	1
Number of Packs	1
Part Number	FPW082KSB
Special Features	Fireproof, Waterproof
UPC	049074032364
Unit Count	1.0 count
Water Resistance Level	Waterproof

SentrySafe Sentry Safe Home Safe, Fireproof, Waterproof, with Combination Lock and Override Key,FPW082KSB, 0.81 cu ft

Details

Details

Description

Specifications

Common Questions