SWM202

So easy to install. Look great. Extremely easy to adjust the position of the speaker after they are hung. A very high quality functional product.

Perfect! Super easy install. Very good range of motion and the bolt holds in place well. No complaints at all.

These speaker mounts work perfectly for my smaller speakers on the wall. 1. What's in the box?: You receive two (you can order a four kit) of these, with screws and mounting hardware included. 2. Installation?: these have a nicely designed two piece system, which has a metal plate with two screws holes for install using the hardware included. Then the main piece slides over the metal piece and you use a tiny screw at the top to tighten it down. The global and crew system here allows slight movement for the speaker but it is not expansive so if you are looking for something the you can really move around this will not satisfy you. I do think for most needs this is enough. I have not had issues with the speaker moving down, but I don't think this is good for heaver speakers at all. Only light small satellite speakers will work with this. In my case due to my speaker, I did need additional hardware and that did require a trip to the hardware store for some additional stuff, in my case nuts. Overall?: These are well-priced and good enough mounts. Nothing heavy, no complex mounting requirements, and the awareness that you may need to get nuts (could they include a little more hardware?) would make this perfect, but as is it is really good. Very well-priced.

The mounts are sturdy and functional, a great value for money. Unfortunately, for those with Logitech Z906, you will have to drill a new hole about an inch below the lower hole in each mount, so that the bottom part of the mount surface doesn't block the speaker connectors, thus allowing you to fit the wires through. This workaround is relatively easy to perform on the four corner sattelite speakers, but the central speaker was a bit of a hassle, as it's placed horizontally, and the distance between the wall mounting hole and the connectors is shorter than the other four speakers. What I did was, I placed the mount surface on the speaker, secured it with the screw, but not too tight. Then I turned the speaker vertically to expose the connectors, fit the wires, held them against the speaker surface with some electrical tape, and carefully twisted the speaker and mount back to its original position. It wasn't easy, but I managed. I'm still wondering why Logitech didn't include wall mounts or at least sponsor a wall mount company to produce specific Z906 wall mounts. I also own the Logitech Z5500, which came stock with the mounts, which unfortunately are not compatible with the Z906 speakers.

These are great mounts I use them for my rear satellite speakers on my surround sound system. This kit includes a few different screws for mounting to the speakers themselves but DOES NOT HAVE ANY M4 SCREWS. Luckily my system came with screws for mounting. The wall bracket is made of metal but the mounts themselves are plastic. If you have heavy speakers id prob look for something all metal but for smaller to medium size speakers these work great.

I've moved these 3 different times, they're easy to install and do a good job. Adjusting them is a little odd and cheap feeling, and the mount kinda blocks the wires, but I'm still very satisfied with my purchase. It's a good value.

The WALI Speaker Wall Mounts are a fantastic find! They were straightforward to install and hold my speakers securely in place. I've been impressed with their durability, especially given they support up to 7.7 lbs. The black design is sleek and blends seamlessly with my room's aesthetics. These mounts have truly elevated my surround sound experience. Highly recommended! Five stars.

I used these to mount my large (24"x15"x13", 47 pounds/each) vintage bookshelf speakers. The mount is quite secure on the wall. However, the mount was not robust enough otherwise - I was able to get the speaker to stand upright and straight, but the slightest touch made it wobble. With any forward tilt at all the speaker lifted out of the clamp dangerously. It was disappointing but not unexpected with this design and such a large speaker. Other reviewers have noted that there are screw holes, but I don't think you should have to put holes in the finish to get a solid mount. Also, it was so wiggly that simply securing the speaker to the mount would not be that much of an improvement. To get the mount to work, I put a screw eye in the wall and in the upper rear panel of the speaker, and ran a thin chain with S hooks to stabilize it. With that modification the mounts worked for my purpose. Even though I wasn't too happy with these out of the box, there is no other solution I could find for a tilting pivoting speaker mount, so to that extent I am satisfied. Also on the plus side they were inexpensive and would have worked very well for a smaller speaker, they arrived quickly, and they were a quality build with very simple assembly. To the manufacturer: You may want to revise your capacity ratings, or perhaps include the screw eyes/chain/S hooks or some other reinforcement in the kit.