Rear Bumper Protector Compatible with Chrysler Pacifica 2017-2026

This rear bumper guard fit my 2018 Pacifica perfectly and was simple to install. After 9,000 miles it looks like new still. This will keep your rear bumper top from damage due to loading, unloading objects. It has a very good adhesive backing. Just follow prep instructions for cleaning location of install. Proper prep will give you a successful result. Looks factory when done. My friend just purchase a 2022 Pacifica and has already ordered this protector after seeing my installation. I would absolutely purchase again however more than likely I will never need to.

The RBP-017 offers durable, easy-to-install protection for your vehicle's rear bumper. Its fits my 2020 Chrysler Pacifica perfectly. It provides comprehensive coverage against scratches and dings. The sleek design maintains my bumper's integrity without breaking the bank. Highly recommended for its effective functionality and cost-effectiveness. Much cheaper than the OEM one that was an option at the dealer. Just buy it! Cheaper than repainting your bumper!

This was not actually designed for a 2020 Chrysler Pacifica.. its a one size fits all years kind of deal. It is less expensive than having to repaint a bumper cover, ( had my Pacifica one week and already chipped). I found it rather easy to install, but I am not confident that it will stay in place with the Texas heat. This does not go all the way up to the sill of the door, and it does not cover the width of the door frame either. I think that if it remains stuck it was worth the investment even though it is overpriced for what it is. Too bad Chrysler omitted this guard on the Pacifica , they put them on the old Town & Country Van, and on the Dodge Caravan's so why not the Pacifica.... Thanks Chrysler. The 4 stars is because I am concerned that it will eventually come off the vehicle. On 30 Jun 2022, I purchased another bumper guard for my 2022 Pacifica Limited, this time I purchased and installed it before the paint got damaged. Its about the best one even if it is a little expensive. I recommend it. Ok, so today, 19 Dec 2022, I received another Bumper guard for my new 2022 Chrysler Pacifica Touring L . I have confidence after the previous installs that this one will last as well. I still wish Chrysler would install them as it doesn't make sense not to have one. I have bumped it to 5 stars and recommend it to anyone who needs a bumper guard.

I got this about $5 cheaper getting it from the Amazon warehouse, which can be hit and miss. Beforehand, I fished through the reviews and decided to take a chance on it. The reviews did help for installation as it didn't come with any instructions. Go figure...thanks amazon warehouse. So, as it comes out of the box and you lay it down on the bumper. It looks like it will not fit right as the bumper pad doesn't align correctly. Don't worry, when you decide to do the final install it will curve into place. Here are some helpful points that I learned during the install... 1. Use a cleaner, then an alcohol pad or similar to clean the bumper for better adhesion. 2. Use painters tape or such to help guide the edges. It will help somewhat. 3. Take all the 3m tape off the back so it lays down easier. Taking one side and peeling it off as you lay it down will not help at all. 4. Make sure you keep track of the arrow in the middle of the bumper pad as you lay it down. It should be as close as you can get it to the rear trunk door hitch. It will help you keep the bumper pad even on both sides. 5. Don't worry about laying the bumper pad down wrong on the one side you start on. Just don't firmly press the pad down on the bumper until you are sure that is where you want to set it. I ended up lifting the bumper pad off the bumper a few times before I felt like it was where I wanted to stay. Once you press it on firmly, it's pretty much on. So, time will tell if this stay on or comes off. But for now, it hides the scratches on the bumper very well and seems to have tight grip on it as well. Don't really know if this is worth $65-$70, but still better then what else is out there. Hope this helps. Good luck. Update: I've had the bumper pad installed for a couple of months now. Still looks great and is still has a good firm grip on my bumper.

We ordered this as it was the first one we came across for my wifes new 2019 Pacifica. We had a similar product on her previous 2019 Camry. Fit on the Pacifica is great and install is super simple. Clean the bumper with rubbing alcohol, peel the 3m sticky tape and apply. Super simple. Takes 5 mins to install. For this I would give it 5 stars. Price point I think is high for what it is. The one for my wifes Camry was an OEM Toyota part and it was about the same price yet better overall quality and of course has the Toyota name on it. Previous car I had before my current car, I had an after market bumper protector that felt of the same quality as this one, yet it was $19.00. I feel this Pacifica protector would have been a great value at $30-$40 but $60 plus it is definitely over priced for what it is. Ill bet mark up on this item is 300% at a $40 price point. So if you dont mind the $60 price tag, go for it. It fits and it appears that it will protect most of the bumper. I do wish it covered the entire rear area but it only covers about 80% of it....the area you are most likely to hit when pulling a stroller or something out of your trunk.

Very nice product. Fit well. should last the life of the van. I like it. Easy install.

Great fit and still holding firm.

I saw some reviews that claim this product doesn't fit correctly or hard to install but that wasn't the case at all. I cleaned the bumper using a microfiber towel and isopropyl alcohol (prepares the surface for good adhesion), and then I removed all the glue protector strips. The product has an arrow to show the center so I kneeled behind the bumper and lined that arrow with the hatch door lock ring. I had my 6-year-old hold one side up while I lined up the right side against the lip of the bumper. After laying the right side down I worked on the left side. Once I knew it was in place I pressed down and sealed the deal. Easy peasy! The product is a thick rubber but not so think it can't be manipulated into place. It looks classy and OEM once on the Pacifica. I recommend it.