Double Sided Mounting Tape Compatible with 3M 12.5mm x 4.7m Black 5925 0.6mm Thick Heavy Duty Foam Tape Strong Adhesive for Car Décor Home Office Logos

I bought this double sided tape to fix a Eufy alarm sensor/s to window/door frames. Seems to hold well and it is similar to the original tape they came with until it lost it’s adhesiveness when I moved it.. I had then used 3M picture hanging strips which were too bulky. This tape is light and narrow and very sticky. Just the job. I hope retains that for further use down the road. Seems to be good value for the amount. Very easy to cut off the required amount and just stick.

I used this to stick double channel plastic track to the top and bottom of lightly varnished wood veneer shelves indoors. It’s very easy to use if you follow some basic rules: 1. Remove grease and dirt from both surfaces before application and let it dry - I used isopropyl alcohol (available on Amazon) 2. Do not pull the tape off the roll quickly - it will stretch if you do, then it will detach itself from the surface as it tries to shrink back to its original shape 3. Use sharp scissors to cut and trim, not a blade - it welds itself to a Stanley knife blade as soon as you slide the blade across it 4. Do not drop it on the floor - there are no side covers so you will find yourself picking off bits of fluff and grit for ages 5. After applying to the first surface use fine point tweezers to peel off the red backing - use the same technique as for removing the backing from cardmaking foam pads. i.e. press down firmly with the flat edge of the tweezers onto the red tape, roughly 2mm from the end. This puts a dent in the tape and loosens up the very end of the red tape. Slide the tweezers under the red tape and peel. The dent does reshape itself after a couple of minutes 6. Is it the correct product for your application ? I’ve read a few comments that say that this type of tape is rubbish because it was used to stick a hook to a painted wall. The hook fell off when a coat was hung on it. The tape stayed attached to the hook and it pulled off a large chunk of wall paint with it. This product is designed to bond to the surface it is applied to, not the substrates. Effectively they have used it to stick the back of the hook to a very thin layer of emulsion paint. It’s the weak bond between the paint and plaster that failed, not the tape.

Does the job, but quite difficult to work with. Removing the backing tape is the problem, has the sticky tape itself is very soft. This led to a couple of crumpled, wasted lengths.

Very good tape, I used it on aluminium to aluminium.

Very good, I used this to re-stick up some Ring alarm sensors that had been removed during decorating.

It does what it says in the description. I used it on various items and still good. Be very careful with using it though as it can stick to your hands and it doesn't retain its shape if you try to take it off.

Could not get the backing off the tape. Up until now my experience of 3M products has been great but this is an utterly useless tape because getting the backing off was near impossible and when I eventually got it off the tape was badly distorted and non functional. I want my money back! UPDATED - there is a technique to getting the backing off and although still awkward it is doable (lots of advice on how on the internet). Once the backing is off, the tape sticks very well both sides and I was able to use it to do the job in hand.

This tape is a good quality tape easy to use and sticks well to metal surfaces

Einfache Handhabung. Habe das Klebeband benutzt, um eine Lampe an der Hausfassade anzubringen, ohne diese beschädigen zu wollen. Funktioniert wunderbar. Hängt seit 2 Tagen und macht einen soliden Eindruck.

I've used this stuff in the past but the 1 inch wide one. It is strong enough to hang wooden letters on a door and this one I used to hang this fabric background on the outside of the terrarium. It can be frustrating trying to separate the glue from the red strip but once your project is done you can be sure it'll hold.

Fa il suo lavoro, l’ho acquistato per fare dei lavori vicino all’auto di un collega e mi sono trovato bene

High quality!

If you've ever had a car emblem fall off in the heat or a shelf-mount fail in the humidity, the 3M VHB Heavy Duty Mounting Tape 5925 is the permanent fix you’ve been looking for. This isn’t just "strong tape"—it’s an industrial-grade bonding agent that actually replaces rivets and screws. The 3M VHB 5925 is the ultimate "set it and forget it" mounting tool. It’s perfect for the DIYer who wants professional results without the need for a drill. Just remember to clean both surfaces with alcohol first for the absolute best adhesion!