TK-2 Black Mid-Tower ATX PC Case, Hyperboloid Glass Design, Separate Cabinet Structure, Aluminum Alloy Shell, ATX/360 AIO Power Support, Black

Beautiful case with a nice finish. Only negative for me is the fit of the glass to the case. No point on having screens on every fan opening if there's a 1/8-1/4 inch gap between the glass and case.

Solid overall case, build quality is top notch. The single piece of glass with 2 bends is just unreal. The machining of the aluminum on this case is amazing. Offers the back connect motherboard, which i feel would work better then a standard motherboard. The 8 pin motherboard cables are a tight fit with an aio mounted, in my use case. The aio radiator is 27MM in height ( Be Quiet! Silent loop 2 FX 360MM) I'm using Phanteks T-30 fans (30MM Height), there is just enough space that allows the cables to move, and not be pinched by the aio. I created this issue, so its not anything negative towards the case. The only issue I ran into was I had to use a different power supply because of clearance when connecting the power cord. I needed like 2MM more of clearance to plug in the power cable for the power supply I wanted to use. Could always just find a right angled adapter to make it work, just didn't have one on hand. However, the psu in the picture is an Asus Tuf 850Watt, and worked out perfect. Other than the problems I created for myself, this is a very nice case. Jonsbo did a really good with this one, finished product is stunning. Totally recommend this brand for their build quality, and ease of installation while building.

Se la regalé a mi esposo y le encantó !!!!

Great build quality and aesthetic. Airflow is a notable improvement over a similarly sized Lian Li O11D *Mini* (which itself is also more restrictive airflow wise than the larger O11 Vision, Evo XL and Evo RGB.The white lacquered finish of the aluminum/aluminium portions of the case are not as prone to finger print smudges as the brushed finish on the black version of this case.Although the TK-2 has more steel than I expected, the case is nearly all steel and aluminum, as opposed to some dual chamber enclosures which feature a fair bit of plastic parts.CPU heatsink air cooling is somewhat limited, with less ability to accommodate the largest of HSFs and only a small area for rear exhaust. 240mm, 280mm and 360mm AIOs or custom water cooled radiators are a better match for this case’s layout. Due to relative overall compact case size, radiators that have extra width or length may not fit.Note this Jonsbo TK-2 V2 features support for newer motherboards with power and other connectors on the backside of the PCB, such as BTF and Project Zero motherboards from Asus, MSI, Gigabyte and others. The older TK-2 V1 version of this case does not offer this motherboard backside connector support.

Love it. Wish it was a tad slimmer and equal glass but I think that's another model. They have a matx and atx one. Both fit a matx mb but you CAN NOT fit anything beyond a rx 7600 in the small one this case might fit a 4080 idk about 4090ti tho. You will absolutely need a metal gpu mount. Don't daily chain the cheap fans. They will all spin sucking air in no matter the direction. You can reverse polarity of fans with some software tho. Tbh the bottom doesn't need fans they get in the way but I put them there for asteitics. My mb was bad so I'm redoing my entire build. The AM5 socket and amd stock cooler sideways is a bad idea imo. The flat chip can move if the cooler gets bumped or assembled wrong. I'd advise investing in a am5 socket protection kit and an air 260mm pump for the top. 3 botton intake fans, 360mm strip, slim. And top exhaust fans as well as keep the gpu only on the top pcie slot with a mount. Or lay it on itd back lol. Make sure the fans right of the mb are sucking air out. So you have 3 120mm fans blowing hot air out the back, 3 out the top and 3 in at the bottom and you csn get a small 75mm fan for beside the pcie slot area of the case if your paranoid. Avoid certian processors and make sure you check compatibility. A cheap am5 board only is good for a cheap am5 cpu. I'd rather build intel and have thunderbolt support than AMD at 6hgz lol