MasterAir MA410M CPU Cooling System - ARGB Hologram Effect, 4 CDC 2.0 Heat Pipes with Thermal Detection, Air Glide Armour and Push-Pull fans - 5 Year Warranty

For me this Argb cooler is good value for the price paid, it's big, performs very well, and surprisingly quiet even with the dual fans. Has a feel of decent build quality and looks unique too. So it's large due to the two push and pull fans and it's well made, for fitting I would advise removing the fans but making sure you put them back on in the right direction. The actual cooling tower its self is tall and has plenty of fins to allow for very effective cooling, the fans and the rgb covers add to the size. For installation it has all the necessary fixings for AMD and Intel processors, thermal paste, guide to fitting and additional cables. I wouldn't say fitting is easy if you are a novice, but it's not difficult either. Make sure you have plenty of space so removing the ram out of the way and case fan helps, I needed to remove those for installation. One thing to point out is that the fan of the cooler overhangs the ram slot nearest to the processor so if you have tall rgb ram then you may have a issue with the height clearance, for low profile or standard memory it would be fine. Performance wise this cooler is very effective, at idle temp kept at 30⁰ and at full load kept at 51⁰ and it's very quiet even with two fans! As for the rgb it works well, looks nice and can be connected to a motherboard header or a rgb hub, however if you dont have either of those then coolermaster have included a mini rgb controller which can be used to get those rgb lights up and running. The only gripe is if you use the mini controller you either have to keep the side of the case open or somehow channel the controller and cables out of the case which would look messy. I have included a video which shows the cooler fitted and working along with a picture to give an idea of the size of the cooler. Hope this helps!

The instructions were not that simple to follow but having read a few comments removed the fans first to make life easier still wasnt that simple to fit but the look is great and surprisingly the unit is fairly quiet. Keeps the ryzen 7 5800x around 45deg

It's a great fan once you get it to work, but if you intend to mount it following the instructions in the booklet, get ready for a fun afternoon. The booklet gives you cryptic drawings that you might be able to decipher, but if you happen to have an older motherboard that doesn't have RGB input, you will not get past it without help from YouTube. Mounting adventures aside, once it's in it works like a charm and looks gorgeous!

Well it works for me PC so I'm happy with it

Does what it says and nice ARGB to boot.

Perfect coler

I returned it and purchased an AIO. Too big, too loud and generally just looks crappy in a full windowed case. Tbh it’s 2022. Just get an AIO.

Well this thing is a beast, and it looks good in the case. BUT, it's also a beast to install. Firstly you have to build half of it so you can mount it on different socket types, but secondly actually installing it on the mainboard was a horrible experience. I ended up removing the fans so that I could get access to the mounting screws to screw it to the mainboard - there was no way I could have used the included spanner to get it attached - firstly there was no room within the case to do that, so I'd have had to mount this on the mainboard prior to fitting the mainboard in the case. But secondly, even if I'd done that, there's enough furniture on the mainboard (ASRock z390) that I couldn't get an angle anyway. So, I removed the fans from either side, which made screwing to the mainboard a lot easier. Then I reattached the fans. However, the fan cable couldn't reach the mainboard connectors! So I had to remove the fans again, unthread the cables from the fan housing, and pull them straight across to the mainboard and refit the fans. Even then it was very very tight. All in all, assembly of this unit alone took more time than the rest of the PC build entirely, and that's not an exaggeration. It looks good, but definitely was not worth the grief. Avoid!

Super CPU Lüfter. Sieht gut aus und macht schon was her im PC. Für diesen Preis kann man echt nicht meckern. Nur die Bauanleitung ist ein wenig mager und der Einbau ging so...mit ein bisschen fummeln und Fingerspitzengefühl passt der Lüfter ordentlich auf meinen ASRock B450 Steel Legend. Da ich eh keine anspruchsvolle Spiele spiele, bleibt er konstant zwischen 42 und 52 Grad. Top Lüfter...kann ich als low Gamer wärmstens weiter empfehlen.

Ventiladores de calidad, radiador que no se queda atras, 4 años con este producto y ninguna queja SALVO su cantidad de cableado y que el mando de control no es inalambrico, pero los colores que tiene... wow magistral. EL sonido es de mi GTX 1650 NO DE LOS VENTILADORES DE LA CPU jajaja

ARGB-LEDも綺麗だし買って良かったと思うけど、とにかくデカイ。買う前に自分のPCケースに収まるのか確認した方が良い。マザボやメモリーによっては干渉するかもしれないし、カバーが閉まらないかも。

Très bon refroidissement et silencieux. Content de mon achat ! De plus il magnifique. La notice pas top, ceux qui n'on pas l'habitude de monter ce genre de ventilateur, vont galérer. Mais si vous taper la référence sur YouTube vous trouverez des guides de montage détaillés. Avertissement : Il est très gros, faite attention à avoir la place nécessaire. Il pourrait bloquer au niveau des barrettes de RAM, voir niveau carte graphique si celle-ci est énorme ou encore vous empêcher de refermer votre tour.

Dissipatore ad aria facile da montare ed esteticamente tra i più belli se non il più bello attualmente sul mercato per chi ama i led RGB, portato a casa a poco più di 50 euro prendendolo nel warehouse amazon. Ha delle belle combinazioni di colori ed effetti. Lo utilizzo con MSI mystic light e mi sta dando soddisfazioni sia in bellezza ma anche in performance, (lo si può utilizzare anche attraverso il telecomandino incluso). Ho un ryzen 2600x e sotto stress non ha mai superato i 70 gradi, in idle sta a 35 circa. lo stra-consiglio!