R185CCSX Circular Saw With 1020 mm 3-Piece Track | Multi-Material Blade, Cuts Wood, Metal, Plastic & More | Incl Dust Port Adapter | 185mm (230v)

I bought this for some DIY projects around the house, and it’s been really useful — especially for getting clean, straight cuts in timber. I used it to trim down IKEA wardrobes to full ceiling height, and it handled the job brilliantly. The cuts were neat and accurate, and using the track makes a huge difference when you want a furniture‑grade finish. As a complete beginner to power tools, I’ll be honest: it felt more intimidating than a mitre saw at first because the blade is more exposed. But after a bit of guidance and a few practice runs, I quickly got the hang of it and felt much more confident. The saw feels solid and well made, with a simple, straightforward design that isn’t overwhelming. It’s not too heavy, and once it’s set up properly it feels stable and easy to control. Power‑wise, it cuts through timber cleanly without any struggle. What I’ve found most useful is how much easier it makes jobs that would be difficult or messy to do by hand — straight, accurate cuts in seconds. Noise‑wise, it’s what you’d expect from a circular saw, so ear protection is a good idea. The dust port helps with mess, though you’ll still get some dust as expected. Top tip: Make sure you’ve got sawhorses or proper support set up — it makes a big difference for safety and keeping the cut straight. I’ve added photos of the wardrobes I cut down (and a short video of the saw in use) so you can see the finish it produces. Overall, I’d definitely recommend this, especially if you’re taking on bigger DIY projects. It might feel daunting at first, but once you get used to it, it makes jobs much more achievable.

I was very surprised by this saw. I bought it as a more affordable alternative to a plunge saw, and it performs very well. The tracks are decent but not perfect; they are not completely flat, but once you clamp them down, they work fine, even though it didn't come with clamps; F-clamps can hold it from the edge just fine without interfering with the motor. It's a very good value-for-money saw. I recommend it for anyone who doesn't expect a professional rail saw but needs plenty of power and solid overall quality. BTW, it's supposed to be compatible with Makita tracks, which makes it even better bargain

Bought an evolution double compound mitre saw a few years back, I was impressed so bought the circular saw with track. The track was very accurate once it’s cut in. I wasn’t disappointed. I used it to cut up old fence and it went through 4x4 with nails in like a hot knife through butter. It’s height and angle cutting it very easy to use, my only gripe is my own fault, I wish I had paid a bit more for the cordless model as the cable is a worry when free hand cutting. Great machine awesome blade.

Unfortunately the saw was delivered in a used state, box had beennresealed and it wasn't packed properly.....however, the saw itself is great, best I've used. Not sure about the track, it's a bit tricky to commission, as the plastic anti splinter edge has to be trimmed and it's not easy to get started. Once trimmed it's extremely easy to use and get great results. Shame that no clamps are included in the kit, but luckily had some others that worked fine

This circular saw is very well made and has the feel and look of a professional tool. I was a roofer for over 20 years and used circular saws and would have been happy to have one of these back then. I recently used it to cut though oak posts along their length for a garden project and it did this with ease. The track which comes with it works well. I would definitely recommend this saw.

Of all the tools in my workshop, the one I dislike using most is the hand-held circular saw. However, I needed to cut up several full 8 x 4 sheets of plywood accurately and having had good service from an big Evolution compound mitre saw, I decided on this one to replace my rusty old wreck. It was also a very good price. I am impressed. It cuts 19 mm ply like a hot knife through butter, with very little tear out and no burning. The track works well, once you figure it out, but is rather short. A tiny drop of WD 40 helps the saw slide much better. I would like to add another three sections, but the price for the track alone is ridiculous - about the same as the saw + track. I even used the saw to follow a line without any other aids and it was easy to keep on track. The trick is to make sure your workpiece is well supported and clamped. This isn't a toy and will remove your fingers in a heartbeat if it gets out of control so make sure nothing can shift during - or after - the cut. Highly recommended.

I've only used this a few times but it's been brilliant every time, including for taking the bottoms off doors, might be overkill for that but it did the job well. Worth getting the proper low profile clamps for the track too, normal clamps won't work because the saw itself hits them.

Excellent product works brilliantly compact enough to fit in my small space value for money

A good product from a reputable seller :-)

The addition of the rails makes here a big difference. I bought extra longer rails and it cuts so clean and straight! Great price too.

Ottimo prodotto oltre le mie aspettative molto robusta e solida unica pecca che le guide sono senza morsetti e non vanno bene quelli normali ma per il resto la ricomprerei ancora

Sega funziona perfettisimo, lama universale. Ma non ci sono i morsetti per fissare la guida. Se usiamo quelli rapidi non fanno passare il motore della sega. Quindi o da cercare i morsetti o comprare un'altra guida da 1400 mm che fa spendere ancora altri 65 euro