Rust-Oleum Home Floor Coating Ultra White Tint Base Coat Quart

I just don't think you get enough product for your money, but where do you nowadays! It goes on very easy and clean up was also easy and fast. I wish the sealer wash thicker and time will tell. Be sure to PREP, PREP, PREP! I used this on our kitchen counter (approx. 100 square feet) and while it did cover 2 coats it still looked thin and maybe easily scratched off, we purchased another can of base and put 3 coats of base, 2 coats of sealer. Looks Very Nice, and as far as durability, again, time will tell.

Me gusto mucho el tono de blanco, si tapa los dibujos anteriores de tus azulejos, lo usé en un área pequeña en pared de cocina y me gusto, solo el paso 2 (el transparente) le di muchas pasadas con el rodillo y al final quedaron unos pequeños grumos como bolitas pero no muy notorios

Here are my FYI’s after doing this project on linoleum in a bathroom: Used the Frog Tape for taping off trim, etc. It took from Saturday-Tuesday just for drying all the coats and removing tape/touch-up below. I waited 1 full week before carefully moving furniture/décor items back. Used 1 qt can for 51 sf, 3 coats color and 2 coats clear, with some left over for touch-up. I put on the same clean socks on before going in after each application. I left the lights on to make it warmer, closed the door and refrained from using an oscillating fan in fear of it kicking up dust, etc. Used a 3” foam brush to cut in edges and other odd spots. When applying the edge paint, it will seem ‘thin’ and won’t seem to cover. Rest assured it will begin to cover as more layers are applied. It’s good to have paper towel and spray cleaner on hand to wipe the little oopsies while painting. However, paint oopsies can be removed after the fact with a cotton swab and acetone, just don’t get the swab soaking wet so it doesn’t drip. It may take multiple swabs depending on the amount of paint to be cleaned up. The clear coat will make the black paint appear blue and milky during application/while wet, but don’t worry, it will look black again once it dries. I’m not sure how other colors are affected by the topcoat application. Reminds me of Elmer’s glue, especially when you get it on your hands. Keep any brushes/rollers with your paint color wrapped tightly and separately in plastic shopping bags until you are completely done with the project. Why? In case you have to go back and touch-up during/after the topcoat application. After my first topcoat (as other reviewers have mentioned) some things may come to the surface. I gently removed them, then used my saved black foam brush to touch up those spots and 3 hrs later, I touched them up again. They will appear darker until fully dry. Then 3 hrs later I went back over with another coat. 24 hrs later I did another topcoat. I left the tape up while applying the top/clear coat. I ended up using a small utility knife to force cut the seal of the tape to avoid extra pulling 24 hrs after the 2nd topcoat was dry. If an area of tape is being difficult to remove even after cutting, I found placing a finger or something on the floor near trim while removing tape may reduce some over-pull. Although, I did have to go back and touch-up some spots using a very small artist-like brush (I used the brushes from my Latisse prescription, waste not, want not). While the topcoat I used was ‘matte’, it does have a very minor sheen to it when dry, which I do like how it turned out! Time and 3 teenagers will determine how well it holds up!

Quedó muy bonita mi cocina, escaleras y pinté las juntas de mi piso. Y usando el 2do paso, queda excelente todo fácil de mantener limpio.

No sirve para pos de baño se levanta al tiempo aún poniéndole la capa de barniz que sugieren para piso de baño es mala la Pintura no aguanta humedad