Q: The turns seem inconsistent or don't spin as much as I expected. Is it defective?

This is normal. The winder cycles on/off to mimic natural arm movement, preventing over-winding and protecting the movement. Always fully wind your watch manually before placing it inside.

Q: Is this winder battery-operated? Do I have to keep it plugged in constantly?

This specific model does not feature a built-in battery compartment. To provide stable and continuous power for the dual motors, it must remain plugged into a wall outlet during use.

Q: Is this watch winder anti‑magnetic?

This winder is not anti-magnetic and isn't recommended for watches sensitive to magnetic fields. If your mechanical or quartz watch is magnetically sensitive, please use a different winder.

Q: The winder rotated for a minute and then stopped. Is it defective?

No. This winder uses interval rotation. Gear B pauses 6 minutes between cycles; Gear L pauses 18 minutes. Please wait through the full pause before assuming a fault. It will restart automatically.

Q: The winder will not rotate at all. What should I check first?

Check the gear switch on the back: it must be on Gear B or Gear L, not OFF. Then confirm the power cord is fully seated in the winder port and your adapter is properly connected to mains power.

Q: My watch keeps stopping in the winder even though it worked at first.

Two steps: manually wind the crown 20-40 times before placing the watch inside, and if it still stops in Gear L, switch to Gear B. Gear L gives fewer turns per day and may not suit lower-efficiency watches.

Q: My watch strap is too short / too loose on the cushion. Can I adjust it?

Yes. Take the cushion out of the groove and fit your watch on it. For short straps, remove the outer cover wrapped around the cushion to reduce its size. The internal sponge core compresses to adapt.

Q: Does the winder stop rotating when I open the lid?

This watch winder does not have an automatic stop feature when the lid is opened. It will continue to rotate and wind your watch according to the mode you have switch.

Question 1

I have two watches in the winder, but why is one stopping while the other works fine?

Accepted Answer

First, fully wind both watches manually before placing them inside. Second, ensure the stopped watch meets size limits (dial <47mm, thickness <28mm); oversized or heavy watches may not sit properly on the turner.

Question 2

The turns seem inconsistent or don't spin as much as I expected. Is it defective?

Accepted Answer

This is normal. The winder cycles on/off to mimic natural arm movement, preventing over-winding and protecting the movement. Always fully wind your watch manually before placing it inside.

Question 3

Is this winder battery-operated? Do I have to keep it plugged in constantly?

Accepted Answer

This specific model does not feature a built-in battery compartment. To provide stable and continuous power for the dual motors, it must remain plugged into a wall outlet during use.

Question 4

Is this watch winder anti‑magnetic?

Accepted Answer

This winder is not anti-magnetic and isn't recommended for watches sensitive to magnetic fields. If your mechanical or quartz watch is magnetically sensitive, please use a different winder.

Question 5

The winder rotated for a minute and then stopped. Is it defective?

Accepted Answer

No. This winder uses interval rotation. Gear B pauses 6 minutes between cycles; Gear L pauses 18 minutes. Please wait through the full pause before assuming a fault. It will restart automatically.

Question 6

The winder will not rotate at all. What should I check first?

Accepted Answer

Check the gear switch on the back: it must be on Gear B or Gear L, not OFF. Then confirm the power cord is fully seated in the winder port and your adapter is properly connected to mains power.

Question 7

My watch keeps stopping in the winder even though it worked at first.

Accepted Answer

Two steps: manually wind the crown 20-40 times before placing the watch inside, and if it still stops in Gear L, switch to Gear B. Gear L gives fewer turns per day and may not suit lower-efficiency watches.

Question 8

My watch strap is too short / too loose on the cushion. Can I adjust it?

Accepted Answer

Yes. Take the cushion out of the groove and fit your watch on it. For short straps, remove the outer cover wrapped around the cushion to reduce its size. The internal sponge core compresses to adapt.

Question 9

Does the winder stop rotating when I open the lid?

Accepted Answer

This watch winder does not have an automatic stop feature when the lid is opened. It will continue to rotate and wind your watch according to the mode you have switch.

ASIN	B0BWRJBH5N
Additional Features	Adjustable
Best Sellers Rank	#1,891 in Watches ( See Top 100 in Watches ) #2 in Watch Winders
Brand Name	Mcbazel
Closure Type	No Closure
Colour	Black Carbon Fiber Leather
Customer Reviews	4.4 4.4 out of 5 stars (2,887)
Finish Types	Polished
Included Components	Automatic Dual Watch Winder (carbon fiber pattern)
Inner Material	Leather
Item Dimensions D x W x H	24.6D x 16.5W x 18.8H Centimeters
Item Type Name	Watch Winders
Jewelry Storage Type	Jewelry Case
Manufacturer	Mcbazel
Manufacturer Part Number	MT-010039
Material Type	Leather
Model Number	MT-wc-010039
Mounting Type	Table Top
Number Of Drawers	2
Number of Compartments	1
Number of Items	1
Occasion Type	Anniversary, Birthday, Father's Day
Recommended Uses For Product	Watch
Shape	Rectangular
Style Name	Modern
Target Audience	Men

Mcbazel Watch Winder for Automatic Watches, Double Automatic Watch Winder Box with Quiet Japan-made Motor, 2 Slots Watch Display Storage Rotation Wrist watch Box (Black Carbon Fiber Leather)

Details

Details

Description

Specifications

Common Questions