2Pcs Coil Spring Shock Absorber Buffer, Car Spring Protector, （C）

I’ll add photos later but these mofos saved my wallet!!!!! Yo if your lowered and the rear is bottoming out or want to raise it a few mm this is exactly what you need!!! I’ve never lowered a vehicle before, this is my first lowered car done by me, springs only on a 2010 challenger. Love the finished product but I have subs and tools and the rear sag slightly lower than the front no matter what bump I hit before adding the spring spacers you would cringe for the car like damn I felt bad for her. DO NOT TAKE YOUR CAR TO THE SHOP TO HAVE THEM PUT ON!!! They will claim they need to remove everything just to put them on and attempt to charge you about $300 bucks Texas tire gave me this ridiculous quota my primary shop said they won’t fit….. I was determined to have these on before I drove out of town, all I had was a old raggedy a** small jack that didn’t even lift the wheel off the ground at full height…!! With a lotta WD40 and some curse words I finally got both sides on!!!!! Long story I know but I’m a real person I am not a mechanic and all I had was a funky a** jack the will to get the job done and a lotta curse words oh and WD40 haha but hey saved $300 bucks the shops attempted to rob from me so do it yourself!!!! Ask a friend for a old raggedy jack you get pissed off enough you’ll finally get them on lol anyway I really love the way the car feels now!! Absolutely completely different a lot smoother and no more cringe from the rear bounce just feels perfect, stable I definitely recommend!Just buy it

I will say that it help solve my coil overs problem. Mb c320 springs are way smaller than factory springs. The adjustable sway bar link can on be extended so far without coming apart while driving with preload on them. The spacers gave the extra spring stiffness I needed to be able to feel safe driving comfortably. For me my suspension is super stiff but it’s a lot better than feeling like I am driving on hydraulics. FYI you will feel every bit of the road but the faster you go the less you feel the road and all you get is a little shaky steering wheel. Another FYI make sure you get a complete alignment. If your lowered make sure your even all the way around. It’s make a huge difference. I am 25 1/8 in the rear and 24 1/8 in the front. I am on 18x9.5 rear and 18x8.5 front. Tire size make a huge difference too. Front is 215/40/zr18 stretch and 245/40/zr18 rear not stretch. I am giving all this information because at two months on coil overs my suspension is finally tune right. Last FYI if your car is slam in the back no one will align the rear wheels unless you raise it at least one finger above the tire and camber correction will not be done unless you install adjustable camber bars front and back. Hopefully this helps someone.

First, the bad:The dimensions on this were slightly off; the "B-size" had a spring spacing listed at 37 mm but actual measurement came in around 41, which doesn't sound like a lot but made installation on the front struts a difficult process involving lots of lube and swearing. It's a tough urethane ring, I'll give it that, and that's how it should be if it's going to bear the brunt of a vehicle going over bumps.The good:The ride quality is noticeably but not overly firm, and the body lean in corners is markedly reduced. These will not add any lift (I only gained less than ½ an inch) but will reduce sag when loaded and helps reduce shocks when bottoming out. Additionally, passengers have also noticed the improvements in how the vehicle soaks up bumps, so it's definitely not a placebo effect on my end. On the fence on these? $30 isn't too bad for what these offer.

These worked great to get rid of the bouncy ride my cheap maxspeeding coilovers gave me in the rear. I definitely recommend these to anyone dealing with bouncy cheap coilovers. Not the easiest to install when you order the correct size they fit as they should a little lithium grease helped they did lift my ride about an inch but worth it for the better ride

Installed in rear 2006 Camry 10/8 very easy to install guess I measured correctly. Measured the car height and that stayed exactly the same but my ride quality is way better the rear struts are junk and it was like being in a boat the car was very bouncy before, these got ride of that

Installation was fairly easy on my 1992 Cadillac Brougham rear springs. I got the A and B types as I wasn't sure which would fit best, but A type ended up being the correct size. I found that running some rope through the hole on the end and then pulling on the rope through the spring made it easy to pop into place when it was stuck. They did help with sagging for, but only for a couple weeks, but the holes were definitely a weak point and they eventually collapsed.

B+ on my 2022 Toyota Highlander, fit OK, I will test it to load the 650 lb hitch weight and then see if it still alive…

I lowered my Mercedes C350 with an Eibach Pro Kit. It was so low in the front it scraped. I jacked the front up, measured, then ordered. When they came in I jacked the front up again. Did not need to remove the rim. Spray the piece with WD40 and slide these on. Zip tie and your done. I used extra zip ties. 5 for each. As long as you use WD40 it's super easy. Took me 20 minutes to do both the front springs. Problem solved. No more scraping or bottoming out. Best cheap fix ever.

Lo quería para Tsuru 3, para que no se sintiera tanto el camino, baches, hoyos, piedras, todo tipo de imperfecciones que hay en una carretera en mal estado.

ممتازه

Excellent product had to refund and return as wrong size was sent to meGood serviceThanks

This thing is even better than I thought it would be! My car rides so much smoother now.

ممتاز