TP-Link PoE Injector Gigabit | Non-PoE to PoE Adapter | 802.3af Compliant | Up to 15.4W Power Budget | Wall Mountable | Plug&Play | Up to 100m(328 ft) | UL Certified(POE150S)

Works well! Solves a much needed problem to power microcontrollers in so many places. I love that it has different voltages, just check the voltage (5/9/12) switch before plugging in!

Item functions exactly as described. Powers my connected device with no issues.

Setup is simple, plug it in and you are done. My cable runs are between 50 and 200' long and this PoE injector works perfectly. I get great throughput. If you need to install a device in a location where a power connection doesn't exist, this makes that simple. Install your ethernet connected device, plug this in and you are done. As with any PoE connection, if you are trying to run high energy requirement switches or things like that, you should first check to see that this will provide enough power to run it. Setting this up takes less time than it takes to unpackage it from the box. Everything is included. Here is an installation tip, for maximum benefit, locate the adpater's power cube closest to the target device where power is available. Even though you can send power a long distance, like anything, the shorter the distance you need to transmit power the better. Remember, this is DC power, it will not power an AC device and the device you're trying to power must be PoE compliant. I really like this solution better than PoE routers because if you get a bad PoE port on the router, you are done, that port is no longer available. With this solution, trouble shooting is simple. If one run goes down, you can immediately check to see if the PoE is the trouble or the device your're trying to power has the problem. Just run an extension cord so you can use the regular power adapter and bypass the PoE injector. Then you will know immediately where the problem exists. I bought three of these and they all worked perfectly out of the box. If you have a WiFi access point or other PoE device that needs power this injector should work just fine. One caveat: Make sure your cabling is up to par. If you have old cables that have problems, this isn't going to fix that. This will work over Cat 5 Cat5e and Cat6 cabling. A lot of times when you read that someone is having problems with networked equipment, faulty cabling is right up on the list of other problems on that network. Always test with a known good cable. Bottom line is that this injector works just as described, has great throughput and is reliable to the maximum distances claimed.

It fit. It seems to function fine.

Using this to power a Unifi NanoHD access point. Seems to work fine, plug-and-play. I used this because the OEM's own version was out of stock and/or was more expensive after shipping. Connections are clean, there's a link LED. The drawbacks to the design are a relatively big (unnecessarily) AC adapter, and no wall-mount bracket. That'll limit installs outside of SOHO, and even at home means making sure there's enough space for it. Overall, it suits the need though it's not perfect. TP-Link is one of my "trusted" brands, but I'll update if the injector fails unexpectedly.

Compact, good looking units, working well for me! At first I ordered the individual units (injector & splitter) but then noticed they are available as a "kit" for less money, doh! I then ordered the kit too thinking I would return the individual pieces. However, on the kit (POE injector+splitter) the units are white plastic, are 10/100 only and non 802.3af compliant. The POE injector and splitter when ordered separately are black plastic, are gigabit and 802.3af compliant. Seems very odd. POE injector comes with the 48v adapter. I ended up keeping all of them. I needed to connect 2 building that are 150 meters apart with a CAT5e ethernet cable. The maximum cable length for ethernet is 100 meters. So I needed to divide the 150m into 50m and 100m sections then add a switch at the 50m mark. However there is no AC power anywhere between those two buildings. I used this TP-LINK PoE injector & splitter kit with the PoE injector placed at the beginning of the cable, the splitter (which acts like a switch) placed at the 50 meter mark powered from the PoE injector and the ethernet cable continues on for the last 100m. I don't use the 5/9/12V output for anything. I used the white units from the "kit", everything is working very well. Saved the black gigabit units for spares, might upgrade to the gigabit ones if client needs more network speed.

I read many reviews on different brands of PoE injectors, and I decided to go with this one. This is a great little device that does the job that it was designed to do. I brought 3 of these injectors to power my PoE surveillance cameras around the house. Although this supports gigabit, my cameras and switch are only 10/100, so I can't comment on the speed of that. However, the data transfer rate seems to be pretty consistent. I have had these injectors for a two months now, and I haven't experience any data signal drop or power failure. And of course, they are ON for 24/7; they have been reliable. Depending on the location you put the injector, the unit doesn't feel hot to touch, only warm at most, which is normal. There is really not much more I can say about this injector. If you are looking for a PoE injector to power your surveillance camera, look no further, I would definitely recommend this one. My only complaint is that, the ethernet cable that comes with the injector is only 3 feet long, and it is too short for any of my camera setup location. But then again, for the price, it was still a very good buy. I brought some longer cables on Amazon, no big deal.

No hay mucho que decir, hace lo que tiene que hacer, trae un cable de corriente tipo dc pero se puede quitar y usar el cable que se necesite, yo use uno con un cable dc a micro usb y funcionó sin problemas, igual trae selección de voltaje así que es compatible con distintos tipos de cámaras, yo estoy usando 2, uno con conector dc de 9V y uno con micro usb de 5V, igual incluye un cable de red.

Overview I have a Unifi POE switch and the base Unifi Security gateway, and I wanted to power it with PoE instead of using the brick that came with it. Because the USG only consumes around 7W of electricity, the TP-Link TL-POE10R Gigabit PoE Splitter Adapter let me do that easily. The Good Parts * Easy to set up - in my case, just set the voltage and plug the wires into the appropriate ports * Well priced * Works with 802.3af * Power up to 12W@12V (check your device specs before buying one to ensure compatibility) * Comes with a male-male barrel port * Comes with an ethernet cable * Lets you select your voltage * Gigabit ready (some adapters only do 10/100, so make sure you check that before choosing one) * Can also act as an Injector only or as an Injector+Splitter (requires 2 units). I only tested it as a PoE splitter and can't vouch for those other two use cases. Could Be Better * Nothing I can think of

I bought the TP-Link PoE injector because my WiFi access point was tired of begging for power like a phone with 1% battery. This little box is like the fairy godmother of networking—one zap, and suddenly my devices are both powered and connected, no magic wand required! Setup was so easy, I spent more time untangling my cables than actually installing it. Now my home office looks like a high-tech lair, and my access point is living its best, fully powered life. If you want to give your gadgets a jolt of energy and feel like a networking wizard, this PoE injector is the way to go. Warning: may cause sudden urges to upgrade the rest of your network just for fun!

Non è assolutamente adatto ad ambienti mission critical. Ho ordinato molti pezzi di questo splitter e alcuni dopo mesi sono morti da soli, con carichi tecnicamente ridicoli o cmq sempre sotto ai limiti dichiarati dal produttore, che dichiara 12v@1A.

Bağlayacağım ürünün voltaj değerlerini karşıladığı için problem yaşamadım, çıkış değerlerine dikkat edin.