Hard Drive Docking Station, TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5" 3.5" IDE SATA I/II/III HDD SSD

It works beautifully, I was able to download from the box of old IDE hard drives I haven't accessed since 1999. All of the working drives were successful at downloading from. I was so happy to find old photographs of my wife and dog from more than a decade ago and some other data from the late 90s from a friend of mine that had lost his copies decades ago. PRO's: easy to use, just insert the drive, plug in power and connect the USB to your computer and turn it on. Windows will recognize the drive (if it's still a functioning drive, some of mine were old and I wasn't sure they were still working, and this device proves what I thought) The drives even retained the partition names which I had a good laugh at what I had called my drive partitions 20 years ago. CON's: it can be difficult to insert the IDE drives because you have to adjust the power connector as not all drives are physically the same dimensions, but that is not fully the fault of the unit, I just wish it had a clear window were I could see the connectors to make it easier to insert the drive. Overall works great, easy to use, only a tad difficult to insert without being able to see contactors while inserting the IDE drives. There is also a slot for SATA drives but I have not used that one yet. it looks much easier to insert because all drives use the same dimensions and there is no need to adjust the power pin positions. I would recommend this unit for anyone needing to pull data off of some old hard drives without the need to open and install anything.

I bought this docking station to recover files from an old 3.5" SATA hard drive that was stuck in a dead enclosure, and it ended up being exactly what I needed. Since I only use laptops now, this made it incredibly easy to connect the drive externally, plug and play with no hassle. The drive was detected almost immediately, and I was able to copy all my files over to a flash drive without a single error or disconnect. Everything worked smoothly from start to finish, and it honestly saved me a lot of stress. If you need a reliable way to access old drives, this device gets the job done perfectly.

I have a (really) old Compaq tower, and didn’t want to lose the files and an important application on that machine. I also didn’t want to keep the computer itself. It took a while to find a dock that would work with such an old HDD, but this one actually worked and didn’t have a huge price tag. The only reason I took off a star is because it was not easy to install. I’ll update if I run into any issues as time goes by.

Update2: Returning this for an exchange. The power socket is bad. This requires the power cable to be required to wiggle around till you make contact and then it will disconnect during use, I like it when it is working and will try another one. I could probably take it apprt and adjust the contacts, but why? I will update #3 when I get the replacement. Update1: This product works as advertised. The power transformer supplied was defective and the product worked fine with a different 12 volt transformer I had. This is a Swiss army knife of docking stations and does a great job!

Bought this so I could read IDE Drives with it. The unit is made of plastic and is not very robust in construction. Trying to get an IDE drive into the bay is an unreal task. The sliding Molex connector in the base of the bay does not stay where it's put. It keeps wandering so each time you try to set the heard drive in place it's almost impossible to do. Since the unit is made of plastic it isn't going to stand much forcing over and over to try to get the hard drive seated. I also noticed it was bending the pins slightly on the 40 pin connection pins on the hard drive as the drive is tilted when trying to align the Molex connector. Since the Molex connector is hidden when trying to put the drive in the bay its a task to get this in and seated well so it communicates okay. I had several Maxtor drives to pull files from and it won't work on the Maxtor drives as the 40 pin connector on the Maxtor drives is closer to center hence alignment is impossible for this unit. and the two connectors even with the adjustment of the Molex connector I work on computers every day and I deal with hard drives constantly. If a competent person on computers has difficulty with this unit the average person is going to have a real hard time with it. It may be fine if you set one drive in it and never take it out. Its still a chore to get the drive to seat in place but once in place if you never have to take it out maybe this is okay. Also the unit keeps disconnecting from the computer as well. At first I thought it might be the actual hard drive that was plugged in but I used it on 8 different drives and it did it on all 8 of them. It also doesn't seem to be able to read really older hard drives, drives from around the late 1990's which is what I bought this for initially. The front slots for USB and SD Cards seem to work fine but I noticed the transfer speed was unreal slow not at all USB 3.0 speed. It would cycle up a bit in megabytes then slow down to nothing. All in all this is something I will never use. I am going to purchase another unit that might be better quality and easier to work with. I thought having one simple unit in its own stand might be the way to go but this one is not that unit!!

I liked the device because of the amount of devices suported. I tested the following: SATA, SD card, TF card and front USB plugs. It is working. - SD slot is mounted back word, you have to insert the SD card with the pin up. - The TF slot is mounted correctly, but it is possible to insert the TF card below the slot where the TF card can fall. - The write performance of the SATA is limited to 14 Mb/s this is very slow. - An SSD disk in the SATA port takes 30 seconds to be detected. - The SD card and the TF card cannot be used at the same time. - Overall quality is poor. I would have pay $15 dollars for well design device. I returned it

Worked as it should.

Cheap & good