Retro Phone Handset with Wireless Bluetooth and USB Handsets for Cell Phones Radiation-Proof Comfortable Call

I purchased the handset basically for the nostalgia novelty reasons. However I’m now using it everywhere around the house. It’s great for keeping background noise low. I find it handy if I need to momentarily free my hands by cradling the handset on my shoulder.. Has a handy button for answering calls or returning a missed call. A small side switch for volume control. Has an easy 30 foot plus range and good audio quality. Almost feels like I’m on a landline phone again. The instructions that came with it could use a little help with the English translation, however it’s fairly easy to set up

I love my phone, easy to use and the sound is great.

This thing works well enough, sounds good enough, and its battery life is surprisingly long. A slight flaw is that the ear and mouthpiece forms are reversed from the classic Western Electric design.The supplied "manual", however, is woefully inadequate. What little information is supplied is all but unintelligible due to its horrid English grammar. After experimenting and searching the net I wrote the following.The NFXSL Bluetooth Telephone HandsetThe NFXSL Bluetooth Telephone Handset (NFXSL) is intended to enhance the use of mobile telephones such as the Apple iPhone. The NFXSL is similar in form to the handsets of the classic Western Electric Model 500 series of telephones that some may find more comfortable to hold to their ears than mobile telephones.The NFXSL provides these features.• Speaker/receiver• Microphone/transmitter• Function switch• Status lamp• Volume Control switches• Micro-B USB connector• Internal batteryThe remainder of this document contains instructions specific to the Apple iPhone (phone). Adjust as required to suit other manufacturers’ mobile telephones.Power SupplyThe internal battery requires occasional recharging which is accomplished by connecting the Micro-B USB connector to a power source via a USB cable. The battery must be charged for no less than four hours before first use. Subsequent recharging requires about one hour. The NFXSL assumes the power off state any time that power is applied to the USB connector.The Function Switch and Status LampThe Function switch is a momentary pushbutton switch that provides power ON/OFF and hook switch functions. The Status lamp can emit red and blue light to indicate the NFXSL’s state.To toggle power on and off, press and hold the Function switch until the phrases “Power On” or “Power Off” are emitted from the speaker/receiver (about two seconds).When power is turned on the NFXSL will attempt to pair with a phone via BlueTooth and the Status lamp will alternate between red and blue at a fast rate. Initial pairing requires acceptance using the phone’s Bluetooth section of its Settings app. When pairing is successful, the word “Connected” is emitted from the speaker/receiver and the Status lamp flashes blue for a short time every three seconds. If the connection is lost the initial pairing procedure may need to be repeated.Any time the NFXSL is powered on and a Bluetooth connection is established, all of the phone’s speaker and microphone functions except for sounding ringtones are overridden by the NFXSL’s receiver and transmitter.While power is on and no call is underway, short presses of the Function switch start and stop the phone’s music app, playing the most recently played selection. If playing when a call is established, the music app is stopped. While a call is underway, a short press of the Function switch terminates the call and resumes the music app’s playback, if it was previously playing.When power is turned off the Status lamp will light red for one second and then be extinguished.The Volume Control SwitchesWhile power is on, short presses of the Volume + and Volume - switches will increment and decrement the phone’s volume, respectively.Making Outgoing CallsTo make an outgoing call, first ensure that the NFXSL is powered on and a Bluetooth connection to the phone has been established. Then dial the call from the phone as one normally does. The most recent outgoing call can be redialed by double clicking (two short presses in rapid succession) the Function switch.Answering Incoming CallsThe NFXSL must be powered on and connected to the phone via Bluetooth before the phone receiving a call. Attempts to connect the NFXSL after the call’s ringtone sounds will result in dropped calls. A short press of the NFXSL’s function switch accepts an incoming call just as does accepting a call on the phone. SpecificationsDimensions: 8.27 x 2.36 x 1.97inches (21 x 6 x 5cm)Weight: 7.1 ounces ( 201g)Material: ABS plasticBattery:Type: Lithium IonCapacity: 200 mAhCharge Time: Initially 4 hours then 1 hourActive Time: 12 hoursStandby Time: 72 hoursCharging interface: Female Micro-B USBData Interface: Bluetooth

Broke already, stopped taking a charge. Terrible quality.

This Bluetooth hand receiver is awesome! Clear as a bell and the caller hears me well too! I can now hear my cell phone conversations better than ever. It is much, much more comfortable holding a phone receiver to my ear than holding a rectangular box to my head! Seems to hold a charge for a long time, although I turn mine off and then on when I receive a call. There is a very slight delay after turning on the reciever before it connects. I absolutely love this and am thinking of getting rid of my home phone, because I can now hear the conversation! Quality: 5 stars; weight: perfect; Functionality: 5 stars

It worked well. The instructions are pretty basic, not sure how to hang up... But could hear well and the connection worked great. It's very lightweight, which is kinda odd if you're looking for the same feel as a handheld receiver, it definitely feels totally different, but it works. The sound was clear.

Fun to use and easy to hold ... Love it.

It works great, and people can hear me great on the other end.